Delco on a piazza engine

[CA18escort]

Hi Guys,
Just wondering how hard it would be to convert a delco 808 unit to run a Piazza engine. Initially I would only have it running the fuel side. I realise that I would need a 2 Bar MAP sensor but apart from that what would I need. I allready have the 808 bin file and a binary editor to change the specs on the rom what else would I need. Does anyone have a turbo 2lt file that I could start from??

Cheers
Paul Nelson

[spook]

I HAVE A FRIEND WITH A GEMINI RUNNING A PIAZZA TURBO ENGINE CONTROLLED BY A DELCO 808 COMPUTER. IT USES A JE CAMIRA WIRING LOOM BUT U COULD ALSO USE A N13 PULSAR 1.8 LOOM AS THEY ALSO USE A 808 DELCO COMPUTER BUT THE LOOM IS LONGER. THE CAR HAS A VNV6 THROTTLE BODY WHICH MEANS THE WIRES PLUG STRAIGHT IN AND THE FACTORY IDLE UP MOTOR IS THEN RETAINED YES YOU NEED A 2BAR MAP SENSOR AND U NEED TO PLUMB IN THE O2 SENSOR FOR BEST RESULTS .AS FOR BASE MAPS I DUNNO AS HE HAD IT TUNED BY THE BOYS AT CHIPTORQUE. GOES QUITE WELL THOUGH AND STILL GIVES EXCELLENT FUEL ECONOMY.