Commodore Int. Light Wiring

[Sumo]

Hi, I was wondering if anyone knew where I could find the wire/switch under the dash running the power to the interior light? I need to tap into this for a relay for other interior lights. Unfortunately the power is running the full time @ the fuse.

Thanks
Sumo

[the bucket]

what model commodore is it?
if you just want to run a relay you can use the wire at the
door pin switches which is usually white
as a negative trigger to the relay
then you can run anything of the relay like neons and alike

[Chris Rogers]

sumo,
if its your ute, then its directly under the drivers kick panel.
wht/grn at the switch.

if you want a timed output ( and a negative one) then find the
orange and white pair in a 2 pin plug just above that. you may have to take the drivers air vent off to get at it.
you need the white one. if all you are doing it adding lights then use the second option.