upgrade sr20det s13 front brakes

[avalonea]

ahoy,

im looking at a upgrade in brake size,

I was thinking r33 breaks on the frount just get the calabers re drilled, but what i want to know is

are gtr r32 calabers the same size as normal gtst 33 calabers?

can i buy rotors from DBA the same size but in 4 stud,

will the new calabers bolt up to my wheel hubs easly ?


thanks for ur time in advance :)

`josh

[dbasteve]

R32 Calipers suit a 296mm x 32mm rotor.
The GTS_T rotor is 296mm x 30mm, so there is a small difference in the thickness.

Both of these rotors are available in un-drilled where you can have an engineering workshop redrill your stud pattern.

R32 GTR = DBA 4926U (SL / SR ) for slotted.
R33 GTS-T = DBA 4963U

You need to check your clearances.

[avalonea]

yeah this is the next thing i have to do is cleariance. i figure i might have to go for a spacer to get em on :/
i have impul rs rims on the front that are only 6 wide.. but seams to be a fair bit of clearence on teh stock setup

thanks for ur help

`josh

[sssgtr]

Originally posted by dbasteve
R33 GTS-T = DBA 4963U


Will these be ok under 16x6 rims?
Roughly how much are these discs (undrilled) worth new?

[dbasteve]

They are 296mm diameter which is correct for 16"s

Retail price - don't know.

Race Brakes, Repco $$, Bursons, Ect should be able to help there.