PDA

View Full Version : TPS sensor needed, urgent, engine dyno in under a week



PLAYA
03-04-05, 11:59 PM
Hi, i have a nissan VH45 100mm throttle body on my SR i made a custom throttle linkage ets as it came with out tps and with out linkage.

I am trying to fid a tps to go onto it, the bolt spacing is 48mm (same as s13) but the rotation is opposite to a s13, also the shaft is D shape and is 8mm in diameter.

I seen haltech make a tps that is either cw or ccw but cant find its bolt spacing on there site, or anything about it for that matter on there site.

I looked at the bosch ones and they dont seem to have one to fit either

Thanks for any help trying to finish motor as the engine dyno is in a week!

http://img.photobucket.com/albums/v430/SR910/Picture203.jpg
roatation looking at it in the pic is ccw

Alex

Ben Wilson
04-04-05, 07:52 AM
It shouldn't be too hard to build up an adpater to fit a Haltech sensor, the bolt spacing doesn't look quite right to me.

Edit - Something like this (http://au.farnell.com/jsp/endecaSearch/partDetail.jsp?SKU=4246676&N=401) should do the job (a little cheaper too).

Zac
04-04-05, 09:28 AM
Can your ecu read the sensor both cw and ccw?

PLAYA
04-04-05, 10:41 AM
autronic can do what ever cw and ccw

i didnt even think there wa sa difference all it is is a linear voltage out put with throttle position, cw or ccw wouldnt have a different reading i thought. Just the physical direction of the tps its self

Zac
04-04-05, 10:49 AM
So the S13 shaft is different but the bolt spacing is the same?

PLAYA
04-04-05, 01:46 PM
yes and it also rotates the wrong way. i have bought a haltech TPS should have it in 2 days, can rotate both ways by just flipping it so ill just make up an alloy adapter bracket and should be all good.

Zac
04-04-05, 01:54 PM
so the autronic can't read the voltage going backwards?

Ben Wilson
04-04-05, 02:21 PM
The problem would be that the TPS would have a spring return and a stop at one end, so they only really go one way..

lambs
04-04-05, 03:00 PM
This is what I use with my Motec:

http://www.rsaustralia.com/cgi-bin/bv/browse/Module.jsp?BV_SessionID=@@@@0536223060.1112591969@ @@@&BV_EngineID=cccfaddefgkehdfcefeceefdffhdgmk.0&cacheID=aunetscape&3290044783=3290044783&stockNo=0319310&prmstocknum=0319310&prodoid=0243160

Just flip over to reverse direction. Gone up a bit in price since the last I bought tho...