View Full Version : Slow N15 SSS with goodies...
Heres my nugget...
It has run a best of 12.4 @ 105mph (I backed off due to fear of breakng out :p). MPH's are averageing around the 113mph mark. I've had the car for about 2 and a bit years and still loving every minute of it.
Currently i'm focussing on the drag aspect of it, but within a couple of months I want to do the twisty stuff as well.
It is only running about 185kw at the fronts due to the stock dump pipe. With this replaced it will be hitting well over 200 for sure! :D
Plans are just to enjoy it now. I won't be doing too much more (haha, yeah right) for a while. Maybe if the motor pops I'll go nuts on it, but hopefully that doesn't happen for a while :p
54C SR20DET ;)
FMIC in black with 2.5" piping
HKS GT2540 (.83 rear)
Z32 MAF
AP Engineering PowerFC
Apexi power-intake pod
Stock BOV
3" stainless exhaust with 5" barrell hi-flow cat
B&M Short shifter kit
Nismo 1.5 Way LSD
PAR straight-cut syncromesh gearset
Slotted rotors all around
Greddy Profec B-Spec 2 running 1.2 bar
JDM Spec grill y0!
DEFI Boost gauge + control unit
16x7" ghetto-spec wheels with Khumo v70a tyres.
Tein HR's
Whiteline rear swaybar
Cusco front adjustable strut brace
Tuned by the genius of Scott from Insight Motorsports
Heres some pics. Some of the mods listed are not in them:
http://i40.photobucket.com/albums/e236/altadr/Cars/Ryan%20N15%20SSS/IMG_3663.jpg
http://i40.photobucket.com/albums/e236/altadr/Cars/Ryan%20N15%20SSS/IMG_3665.jpg
http://i40.photobucket.com/albums/e236/altadr/Cars/Ryan%20N15%20SSS/IMG_3659.jpg
http://i40.photobucket.com/albums/e236/altadr/Cars/Ryan%20N15%20SSS/P6070004.jpg
http://www.fullsickbro.com/album/displayimage.php?album=57&pos=13
Heres a vid of my 12.4 run (may not be work safe due to swearing :p).
http://www.fullsickbro.com/album/displayimage.php?album=57&pos=0
Great times/MPH out of a SSS :)
S
This thing's a definite a sleeper.. looks like a run of the mill stocko SSS but boy it hauls ass :D
willsy01
27-11-06, 11:12 AM
No 11s no care :D
No 11s no care :D
BAH! Quiet you! :p
Give it time :D
Nice time, but you still have to beat my best of 117MPH :P
MR-PUNANNY
27-11-06, 11:34 AM
Ahh You! Are you the GWR Warrior???
Jem - 117mph, give me until January :p
MR-PUNANNY - What have you heard? :lol:
Now this I like. Sleeper but neat looking. A lot of people believe that sleepers need to look like dungers but I disagree.
AAAAAAAA++++++++
Dansedgli
27-11-06, 12:35 PM
Nice one!
I would never suspect that ran 12's if I pulled up next to it.
MR-PUNANNY
27-11-06, 01:43 PM
Jem - 117mph, give me until January :p
MR-PUNANNY - What have you heard? :lol:
I sold a set of semis to a pulsar guy, the guy thats importing the 2 doof n15 thingys, and h is ex mrs suppose to have a mchine pulsar too.
brasher
27-11-06, 05:54 PM
Good stuff Ryan!
Bit of an updated...
I've gone from sychro gearset, to dog gearset... should be installed within the next couple of weeks (before March 10, drag warz). Hopefully it sends me deeper into the lower 12s :)
Nice work mate, I'm hoping to have my Exa around the same power level in a month or so but I'm skeptical about getting it into 12s. Congrats on the results so far!
muttaburra
17-02-07, 08:50 PM
always had a soft spot for the pulsars having owned a N14 Ti. running 12's is pretty awersome. what sort of dollars for the gearbox?
Morgs - Thanks mate :)
Lonx - If you have the same amount of power in a lighter chassis, then it's achievable. However, as with any fwd car, if you want it to run good times, a strong mechanical diff (or even a welded one) and some reasonably good tyres are going to be needed. Otherwise, it will be doing 13s all day.
Muttaburra - I am trying not to think about the cost. Because i'm doing a swap with PAR for my current straight-cut synchro box, i'm not sure how much it would cost all up, but you would be looking somewhere in the vicinity of 5-6K. Lets just say it better be bloody worth it :D
hahaha you might chop the GTR now Ryan
not that that's a hard task at the moment, bloody thing lol
maybe you should get some head work done so you can rev it out a bit more, you seem to be constantly hitting the limiter :P
Bit of an updated...
I've gone from sychro gearset, to dog gearset... should be installed within the next couple of weeks (before March 10, drag warz). Hopefully it sends me deeper into the lower 12s :)
Make sure you leave enough time to practise the quick shift :) Otherwise you'll just be grinding gears on track:(
HSV Senator
18-02-07, 11:05 PM
Nice work, I like it! Very impressive times to.
Make sure you leave enough time to practise the quick shift :) Otherwise you'll just be grinding gears on track:(
Mr GMC said the 'box will be getting done this week, so 2 weeks of practice will hopefully enough :confused:
I'm sure he will give you a couple of lessons anyway. But if you need more help just give me a call.
Yeah he is giving me the expert driver training as part of the package :p
No worries man, i'll let you know if I need some guidance :)
mitsubishiman
22-02-07, 10:06 AM
12.4 u say?, good time for the sss
ya see now you will need to double clutch and not granny shift like ya have been.
Dog box is in...
What an improvement! It's definantly a totally different driving experience and there were a few initial crunches :eek:... but i'm loving flatshifting... insane!!!!
XAC15T, can I ask how much the dog box set you back (rough figure even)?
I did an exchange with PAR through www.gccorp.com.au because I already had a straight-cut synchromesh gearset. The final price has not been finalised, but it's around 2K changeover.
No real updates...
Raced at Drag Warz on the weekend in Sport FWD, came out top qualifier with a 12.4@114mph. My 60 footers were shitehouse (2.2s) so theres definantly a lower 12 second pass in it for sure. Power is still the same at about 185fwkw. Got another trophy so was pretty happy about that :p
Next step is to get some dedicated drag radials, either MT's or BF Goodrichs, tune, dump and injectors, then take her out again for Compak Attak in May and run consistant 11s :)
Heres an updated pic too...
http://www.kylesharpphoto.com/gallery/d/1623-2/100320070137.jpg
willsy01
16-03-07, 12:45 PM
Did someone let the guy behind you know he left a funnel where his headlight should be?
Must have been filling up the gearbox oil :lol:
Little update...
Just bought these:
I'm going a bit nuts as of late...
Just bought a set of these... 17x7
http://www.buddyclub.com.tw/SF_MatteBlackThumb.jpg
Also, didn't get the dump, retune and injectors done. Compak Attak is in one week... so hopefully I just improve on my times with the current setup... :)
Wheels are hot shit, will suite the car very nicely. What are you gonna do for a dump? Custom jobie or jap brand?
Going for a custom jobby through CHE me thinks... just got to give him a call to organise it :p
tremolo
17-07-07, 03:53 PM
Your car's shit as it is wrong wheel drive
Just kidding, that's awesome mate :)
nice website on the windscreen :)
awesome choice in rims mate... big fan
Going for a custom jobby through CHE me thinks... just got to give him a call to organise it :p
Thats what I've just done... hoping to get her back this week :)
admittedly, i had to get the front pipe redone & new cooler piping anyway so it was worth just doing it all in one go.... i'll throw some pics up when I get it back!
Its a gypsy catcher.
Did someone let the guy behind you know he left a funnel where his headlight should be?
Good work. Seen this car around the pits in Sydney. Never knew it ran
12's. Are you coming up for Jamboree?
awesome choice in rims mate... big fan
+1
Buddy Club P1 and Volk TE37's are teh sex when it comes to Jap wheels.
Going for a custom jobby through CHE me thinks... just got to give him a call to organise it :p
Wise choice :)
Love the sleeper look :)
Good work. Seen this car around the pits in Sydney. Never knew it ran
12's. Are you coming up for Jamboree?
Yep, coming up for Jambo... will hopefully be running deep into the 11s :)
As I said, CHE has done 4 of my mates cars (mostly i/c piping work) and it is all really top-notch stuff. Don't mind paying a bit of extra for quality/good service.
Thanks for the kind comments guys, got a few things happening and many changes since my last list of mods... i'll keep you all updated :yup:
Yep, coming up for Jambo... will hopefully be running deep into the 11s :)
Good luck with it! I'm hoping to just get a low 13 to be honest.... won't know until I finally get down to WSID.... drag virgin here - so probably going to work through 14s while I get used to the surface :(
Oops, sorry, car rolled off dyno at 4am Friday morning before Jambo with 209fwkw. It ran a 12.2@117mph which is a new pb for me. Once all the issues are sorted, it will piss in 11s :D
And some pics... :)
http://img258.imageshack.us/img258/5315/img2013zl4.th.jpg (http://img258.imageshack.us/my.php?image=img2013zl4.jpg)
http://img258.imageshack.us/img258/6315/img1996eu2.jpg (http://imageshack.us)
oi, where's pics of the car with all four of the new rims on it? :D
Are you going up to Jambo part II?
Yep going to try my hardest to get there :)
Heres some vids from jambo :)
12.29@117:
http://www.youtube.com/watch?v=Z8IaBes4Dew
Mucking around at Scotty's (Insight Motorsports) with the launch control/anti-lag at 3am the night before :lol:
http://www.youtube.com/watch?v=M_A3a-qXhhU
Got a mini-feature in the next issue of Zoom with a few other people from pga... :)
http://i154.photobucket.com/albums/s243/z33_01/IMAGE0005.jpg
RICE_MOBILE
25-12-07, 08:45 AM
What a sick cunt. :D
nice sleeper!!! i bet everyone in a skyrice etc thinks there going to beat you!wrong!
did you paint the cooler or have it anodised?
What a sick cunt. :D
You know where it's at :lol:
Nah, painted black... might need to do it again soon :rotflol:
What rounds of the SCC are you doing this year?
Ok, so it's rebuild time... :)
http://img142.imageshack.us/img142/9270/dsc00075bi9.jpg
Car was running on 3cylinders and had no comp in #2. Turned out that piston ringlands and rings are completely destroyed... cylinder wall will also need a slight hone :)
PAR rods and CP Pistons to come... all ready in 1 weeks time for heathcote hopefully :lol:
http://img50.imageshack.us/img50/1084/pistonsideop2.jpg (http://imageshack.us)
http://img254.imageshack.us/img254/29/pistonside2on4.jpg (http://imageshack.us)
http://img50.imageshack.us/img50/433/borefs9.jpg (http://imageshack.us)
http://img254.imageshack.us/img254/1881/bore2xw2.jpg (http://imageshack.us)
bad luck man hope it all goes back together nicely, i still reckon the money was better spent on a certain cortina :D
ouch! sounds like its going to be bigger and better though!!
Good luck! Who's doing the motor?
My personal mechanic :p
Gerard @ www.gccorp.com.au
Machining by Edmargs at St Marys.
Sponsorship, as discussed...
http://www.decalfx.com/DRR1.gif
?
http://www.grafixpressions.com/prev/ff_drift_prv.gif
Grumpy Rooster
28-02-08, 11:04 AM
He's at Willowbank this weekend for Mini-Jam. Should have some decent times after this weekend (provided it doesn't rain).
Fingers crossed :)
Went to Heathcote... ran 12.2s - 12.4s all day and snapped a driveshaft... have two spare ones just incase at Willowbank :lol:
Good luck this weekend, dude!
Heard you got lost and went drifting instead Ryan... :)
Did two 12.5s @ 115mph for some fuckin reason, then realised launch control wasn't working too great because one of the ABS rings was not on the car, thus the shit times. Put it back on, went out, snapped said driveshaft and missed the rest of qualifying.
Went through the first round no probs, red lighted in the second by fuck all :oops: :lol:
It's been decided that the turbo upgrade is going to wait after Compak Attack, because I need some consistancy out of the cunt to get any chance of being back in the championship... :lol
Hopefully billet shafts and more launch control tuning will be done in time :)
Bit of an update... Ran at compak attak, 12.0 @ 118mph, top qualifier in sfwd and now et record holder (:D)... so so close to 11s... ;)
Heres some vids...
http://www.youtube.com/watch?v=mMFwNHI5iU4
http://www.youtube.com/watch?v=3VXqM9pFzBE
http://www.youtube.com/watch?v=6Ff7CgVMVE4
:)
Uh oh.. Shit...
Watch out GTR's...
What does your car weigh? What tyres are you competing with?
Doing some work on an exhaust manifold atm for a car that will hopefully give you some competition.
Congrats on having a national record holding car :thumbsup:
mt e/t streets and it weighs too much (1100kg).
Cheers mate. If I take away the championship this year, I might just forget the drag thing and start focusing on circuit... haven't tried it yet and want to see how I go :)
He only weighs 45kg ringing wet so no real issue there :h5:
Broke into the 11's easily this weekend. Good work!
Was good to meet you.
Shit, sorry man, I don't think I got any photos of you. Although I can remember saying to my brother that's a pretty quick dial in time though. :D
Thanks Guido! Nice to meet you too champ :D
Hehe no worries Monk, I ended up breaking the dial in too with a 11.73@119mph anyway :lol:
Grumpy Rooster
26-08-08, 10:26 AM
I only got to watch 1 of your runs and that was the run you had a problem on. :(
Excellent work cracking into the 11's.
jizmstr0
26-08-08, 09:59 PM
Well done mate. Had a chat to Finney from Toymods who told me about your PB.
When he said you ran 11's I thought it would be at 125ish mph like most fwd's. Looks like you have a really well setup car.
Thanks guys :)
Heres some vids... pb on sunday was 11.73@119mph but it didn't get filmed...
http://www.youtube.com/watch?v=6ryT74r_KT4
skankyjoe
30-08-08, 01:06 PM
Was just going through my jamboree photo's and found one of you. It's from sunday, i remember sitting in the stands thinking there is a guy from pf who has a n15 SSS. So i just took some photo's of it just incase it was yours.
http://farm4.static.flickr.com/3058/2810340234_1b2e77dcd7_o.jpg
looking good!!
did you happen to line up against an older style tiger mica lancer with a 4g63? has 'forbidden motorsports' or something like that down the side.
was a mate of mine and i think he mentioned your pulsar
No more skids for me... thinking it's circuit time now :)
obsessive
30-05-09, 11:38 PM
about time but u better still compete at compactt attack style events!
jesus christ, i can't believe i missed this.. an 11 second SSS!!! Have owned two and have a real soft spot for these.. can't imagine what they'd be like running 11's...
sketchypiMp
31-05-09, 02:00 PM
Jesus that thing just gets up and fucks off into the distance doesnt it?
Nice work mate, must be fun roasting wankers in commos and the like with that.
Matt T.M.C
31-05-09, 09:25 PM
Just felt like putting these up again :lol:
http://i5.photobucket.com/albums/y156/JAPSSS/DSC_0040.jpg
http://i5.photobucket.com/albums/y156/JAPSSS/DSC_0045.jpg
Damn that was an awesome skid
Fuck me!
Ryan did you toast a full set of fronts?
obsessive
03-06-09, 12:19 AM
amongst other things
Bit of an update... :)
The car has undergone a bit of a re-vamp... it's now in circuit-spec... i'm over drag and my first love has always been circuit racing, it's just that I have never gotten around to getting the car sorted for it... now after two trackdays i'm hooked! :p
The car has undergone a few changes...
R32 GTR calipers and discs (with re-drilled N16 hubs)
DS2500 pads (going 3000's when these wear out soon)
17x7 OZ Racing Superturismos in white
DZ03G Dunlop semi's
19row mocal oil cooler with relocation kit
Upgraded PWR Radiator
Defi Din Gauges (water temp, oil temp and pressure)
Took it down to wakefield a few weeks ago for the first time, did a 1min11.24 after only around 10 flying laps before it rained and just last weekend on sunday did a 1min23.7 at Oran Park GP for my first supersprint (again first time there). So all in all i'm pretty stoked, considering the car still needs a camber friendly alignment as well as maybe some high adjustment and corner weighting :)
I can honestly say I am hooked on circuit now, now i'm looking at a cage, maybe a surge tank and tidying up a few things...
Heres some vids a mate took from sunday :)
http://s50.photobucket.com/albums/f349/russ83/Oran%20Park%20201209/?action=view¤t=MOV03371.flv
http://s50.photobucket.com/albums/f349/russ83/Oran%20Park%20201209/?action=view¤t=MOV03332.flv
http://s50.photobucket.com/albums/f349/russ83/Oran%20Park%20201209/?action=view¤t=MOV03335.flv
http://s50.photobucket.com/albums/f349/russ83/Oran%20Park%20201209/?action=view¤t=MOV03336.flv
http://s50.photobucket.com/albums/f349/russ83/Oran%20Park%20201209/?action=view¤t=MOV03371-1.flv
And heres a 'still' photo... :p
willsy01
23-12-09, 11:53 AM
Get some proper numbers you hobo!
Surge tank is a must dude....
Yeah bitch nice work! I thought you had flogged this off. Good to see you're still into the pulsar.
Cheers guys!
Yeah Gary, it was a bit touch and go for a minute, but I decided to hold onto it and make it a track pig :p
vBulletin® v3.6.7, Copyright ©2000-2010, Jelsoft Enterprises Ltd.