PDA

View Full Version : 13for13 AllTalk Performance Wagon



Panda I give no fuck
01-01-11, 08:52 PM
First things first, before any Terry's blow a gasket. There will be alot more then $1300 worth of gear in this build (that will go in then come out after we kill the motor) but its all accumulated shit and we dont expect to be out of pocket by more then a couple of hundred bucks.
So this is more a 13 for 13 "inspired" build for fun Between about 10 of us from cb all pitching in in different ways at different times, and we hope to have her ready to run with you guys in 3 months.

So we are starting with a VK commo wagon, 253 and traumatic which owes us about $200 as it sits. then we are going to beg steal and borrow as much as we can to make her faster, look good and more relyable.

work started today with some sore heads, pulled her out of her cave and started stripping her down ready for the build. Tomorrow she will be taken to her new home for the next 3 months.

Pulling her out
45107

what a piece of shit
45108

insides after 2 trips to the dump
45109
45110

Dave
01-01-11, 09:05 PM
Needs more turbo :p

tut
01-01-11, 09:08 PM
needs less dash

SausageFingers
01-01-11, 09:22 PM
needs less dash
Start on that tomorrow

ALLMTR
02-01-11, 01:05 AM
Nice, VK in da house.

Boosting or nitrous?

SausageFingers
02-01-11, 01:37 AM
Nice, VK in da house.

Boosting or nitrous?

Boost.


Then Nitrous

<---cop
02-01-11, 02:03 AM
I will need a source for new $200 KKR330s as well......

Dave
02-01-11, 10:15 AM
Wouldn't you be better of with a bodgy gt4082

Rorz de Puniet
02-01-11, 01:48 PM
Wow, that really is a shitter.

dirty_sandwich
02-01-11, 02:39 PM
Go mate! Prove that the 253 can do it ;) Is it just a stocker or are you bumping things up a bit there?

SausageFingers
02-01-11, 05:44 PM
Just finished drinking a few beers and pulling some extra shit out of the VK.
Will post pics later on,

Thanks for the HAND Lee:gay:

Panda I give no fuck
02-01-11, 06:24 PM
Thanks should ho to ben for letting us use the highlif jack

Panda I give no fuck
02-01-11, 07:29 PM
moved her today to the worksite along with motor and driveline ect

45130

OLS108 decided we had too much dash still so out it went along with all the ac system and cleared out the enginebay of anything not needed. cubes and ols108 have other pics

45131
45132

Panda I give no fuck
02-01-11, 07:37 PM
Go mate! Prove that the 253 can do it ;) Is it just a stocker or are you bumping things up a bit there?

just a cleaned up stocker. will suffer nitrous and or boost

ALLMTR
07-01-11, 04:41 PM
13s section?

SausageFingers
07-01-11, 05:55 PM
13s section?

Please.


Working on this again this w/e, I believe we've managed to find a hot cam for her as well.

should have the POWER(ALL) TALK Sticker made up shortly too, just to excite the LS1 crew at willowbank




PS. any cunts got some Front seatbelts laying around ?

Dave
07-01-11, 06:18 PM
I had some somewhere, but I fear I may have turfed them, I'll check. I still have to run belts even though I have harnesses.

I'll let you know if I have a spare set over the weekend

2JZR31
07-01-11, 06:38 PM
Good so see another entrant. This will be real exercise in turd polishing. Exactly what 13 for 13s is all about. I don't think you will want an overly large turbo for this. Something GT35 size should do it. The humble 253 made max power at a diesel like 4400rpm.

SausageFingers
07-01-11, 06:40 PM
I had some somewhere, but I fear I may have turfed them, I'll check. I still have to run belts even though I have harnesses.

I'll let you know if I have a spare set over the weekend

Thanks mate.

Jim
07-01-11, 06:47 PM
I have some VN ones if you want them.

SausageFingers
07-01-11, 06:49 PM
I have some VN ones if you want them.

Thanks Jim, they might work, I will let you know early next week if we need them, I will organise for a courier to get em from ya.

Tils
07-01-11, 07:06 PM
Loving this quest!! Showing cunts entry level drag racing is not out of reach!!!!

buzz
07-01-11, 09:07 PM
253 pride!!!

This is another to watch. Good luck.

Dogsballs
07-01-11, 09:49 PM
keep <------------cop away from it and you'll be fine.

the 'ol slo 8' will be very fitting for this car ;)

Dogsballs
07-01-11, 09:49 PM
also, i've got money riding on this car blowing up. so please do your end share of the bodges.

briney
08-01-11, 10:55 AM
will vl ones work ?

aaron_hogan
08-01-11, 10:22 PM
the 'ol slo 8' will be very fitting for this car ;)

I always read that user name as Ol' Slob :lol:

Dave
08-01-11, 10:28 PM
I got a roughly 286 spec come cam sitting here, buy me a bottle of Jim beam and it's yours, I need some cheap bourbon for the house guests :p

I am doing a clean out tomorrow, will see what other useful shit I find. I think there is a holley blue, with a bodgy looking wire that you could have for another bottle of cheap piss :p

Dave
08-01-11, 10:30 PM
Ps, if it catches fire it's your problem, not mine :p

SausageFingers
08-01-11, 10:47 PM
I always read that user name as Ol' Slob :lol:

Awesome
Its actully

O LS1 08

but I didnt expect you cunts to get it:lol:

SausageFingers
08-01-11, 10:48 PM
Ps, if it catches fire it's your problem, not mine :p

we are working again on this tomorrow, so I will find out what we need.

Cheers

I think we have already assumed this will catch fire anyway

Panda I give no fuck
09-01-11, 06:37 PM
well due to the weather in brisbane being as impressive as shitcunt4's posts we have been forced indoors this weekend. Also, true to OL SLOB form, dave was nowhere to be seen this weekend the weak cunt!

During the brief dry periods the wiring loom got a haircut but other then that the car has not been touched. We have turned our attention to the motor n box instead. We were gona use some expensive goodies we have laying around but in the end we have decided stay true to the cause and honour the $1300 theme and keep her stock(we actually cant be fucked putting new bearings and cam in, and the roller rockers were going to be a fuck around but pretending to be good sports sounds better).

basically the motor n box have been pulled down, given a much needed clean, checked for damage and regasketted. would of had the motor knocked over today minus bolt ons but we are missing a rocker (have a feeling my bulldog is responsible for this) and I grabbed the wrong intake manifold from home so will have to wait.

so costs to date are as follows
The VK with 253 and traumatic owes $300
top end gaskets $70
sump gaskets $12
traumatic filter n gaskets $7 (I shit you not)
gasket goo $27

total $416



Heres some pics cause everyone loves pics

engine as she sat this mornin
45292
45295
45296

some shit still needing to go to dump
45297

gaskets
45290
45291
45293

A toilet I walked into at bunnings on monday, that shits fucked
45303

the box being treated to the best silicon $2 can buy
45294
45298

motor going back together and as she sits now
45299
45300
45301
45302

SausageFingers
09-01-11, 06:45 PM
Sorry Lee, I had a hairdressers appointment today.

LOL @ the bunnings shitter though

Dogsballs
09-01-11, 08:37 PM
lol, at the safety thongs!

Panda I give no fuck
09-01-11, 09:15 PM
also, seeing as we reused the old head bolts we intend to have a crack at being Australias fastest stock unopened LS1

Dogsballs
09-01-11, 09:35 PM
you better grind off the 253 from the block then ;)

morerevsm3
09-01-11, 09:43 PM
253 is an accepted LS1 (starter motor) for record attempts

phat_dat
09-01-11, 11:06 PM
lol, at the safety thongs!

its ok i'm a concreter

phat_dat
09-01-11, 11:11 PM
couple more pics of the boys fucking around with the motor

Panda I give no fuck
11-01-11, 10:34 PM
Well ses booted me out of my house today so we continued on the motor, got her finished, tried cranking her over but starter didnt seem up to the task, will have another go later in the week. Upload pics later

Panda I give no fuck
11-01-11, 10:56 PM
45343

Panda I give no fuck
13-01-11, 09:51 AM
Hopefully willowbank isnt too damaged from the rain so it opens back up for us soon

cub35
14-01-11, 11:25 AM
Things are slowing down on this build now. We have plenty of friends and unknowns that require help with the floods. Dont know when we will get back onto this

ALLMTR
14-01-11, 11:28 AM
Yeah that is perfectly understandable

MRMOPARMAN
14-01-11, 12:01 PM
postpone challenge for 13 weeks?

ALLMTR
14-01-11, 12:11 PM
From what I can tell this is the only competitor affected

Panda I give no fuck
14-01-11, 01:56 PM
We wont be offline for long, were not personally affected, just may do a bit of weekend work to help out other ppl. doubt we will miss the 13 weeks. If we do then we will get there eventually

Panda I give no fuck
19-01-11, 11:54 AM
GAAAR, Still haven't got back to this, and won't this weekend either. maybe the following weekend, couple of the boys have personal shit thats more important that is going on now, so its prob just cub35, phatdat and I working on her for the near future.

also cub53 was passionate he could pull an auto down and put it back together, he couldn't. thats why I let him try it on the broken one first. so now were going to use another one I have that looks like its recently been recond, I got it and another box free with a 308 i bought for $400. so im thinking $100 - $150 more to the budget? I think thats generous.

Panda I give no fuck
21-01-11, 12:03 PM
finally done my tax return, now to buy the nopics some crap from the jewellers so im aloud to get a nitrous kit

ALLMTR
21-01-11, 10:03 PM
14.2

Panda I give no fuck
21-01-11, 10:18 PM
No 14s, nos will make it either 13s or ntr

Dave
21-01-11, 10:29 PM
Lol @ntr

ALLMTR
28-01-11, 09:15 PM
Bump

Panda I give no fuck
28-01-11, 10:16 PM
Bump

has all gone to shit. everyones got bigger problems now and theres no coin in the kitty

SausageFingers
28-01-11, 10:18 PM
has all gone to shit. everyones got bigger problems now and theres no coin in the kitty

Sorry to hear about your dog.

ALLMTR
28-01-11, 10:20 PM
:(

gerry
28-01-11, 10:24 PM
how much do we need to kick in for $1300? or is it a time thing?

SausageFingers
28-01-11, 10:24 PM
At the present I have to care for my Dad who had a tripple Bipass 2 weeks ago, so He needs me to drive him too and drive appointments, do the shopping etc, all the shit he can't do by himself.

Sorry to be a slack cunt, I just aint got time:(

Jim
28-01-11, 10:49 PM
Sounds like you guys need to park it for better days.
Hope things come good soon!

Panda I give no fuck
29-01-11, 08:59 AM
Sorry to hear about your dog.

Lolz

Panda I give no fuck
25-02-11, 10:38 AM
Im in cloncurry now, this things dead

Panda I give no fuck
15-02-12, 04:16 PM
1 year on I live in Toowoomba with no yard or workshop and this is still living at CUB35s in Brisbane with his nopics up him and myself to fuck it off, Im keen to take it to the dump but Benny is still holding out.

So im putting out an EOI. Assuming Ben loses his battle with the boss and it gets evicted, is anyone preferably out Toowoomba way interested in housing this piece of shit and starting an ethanol only (not blended with petrol) racer project with me? You house it, I supply car, parts and ethanol, we work on it. This would not be ground breaking research as it has been done a million times before, but would just be some cheap fun and somewhere to start in my eventual goal to run 12s with a carbied 304 in the torana souly on ethanol and water. If anyone did this then changed their mind or it wasn't working out, the wagon will just go to the dump and I would put the motor n tranny in my garden shed, as per its current likely fate.

If anyone is keen and this gets on its feet, I will start a new thread and call on the collective knowledge of PF.

Dogsballs
15-02-12, 05:38 PM
commiserations for living in toowoomba!

Panda I give no fuck
15-02-12, 05:43 PM
Thanks brah

cub35
15-02-12, 06:46 PM
I've given the owner of the 350 his last chance to pick up his motor. Still no show. So hows does ethanol go on a methanol motor?:dunno:

Panda I give no fuck
18-02-17, 02:09 AM
PF Sleuths, please find me an auto VN or VP wagon in someones SE QLD back yard for a carton of beer.

Regards, Panda

Lobster
18-02-17, 03:53 PM
Whoah.... A resurrection!

Panda I give no fuck
22-02-17, 05:46 PM
Reset the clock at $300. Will make a new thread soon

98125

Milkman Don
22-02-17, 05:52 PM
Lee this is awesome, you gonna ghetto turbo a moo or drop the torana motor in?

Panda I give no fuck
22-02-17, 05:54 PM
Yeap ghetto turbo.

Milkman Don
22-02-17, 06:30 PM
[emoji7][emoji7]