Page 1 of 3 123 LastLast
Results 1 to 30 of 69

Thread: Syd - MX83 Cressida 7M turbo

  1. #1
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986

    Syd - MX83 Cressida 7M turbo

    Hi all,

    $9,000.

    Considering parting with my Cressida. Had ALOT of money put into it. Almost finished but I've got way too many projects going on and this was the last car I got so first to go. I'm sure I'll forget some stuff thats in it.

    1989 Toyota Cressida MX83
    Resprayed white
    17 inch rims
    235 front tyres (very good)
    255 rear tyres (worn on insides)

    Stock rims on it now. Comes with mags too.

    Engine:
    Fully rebuilt 7M engine (you could change the flange plates on the manifolds and put a 1J or 2J in pretty easily, all the fuel system, ignition, accessories, etc are there for mega hp)
    forged pistons
    aftermarket rods
    big valves
    head work
    all studded
    etc etc
    Full list here somewhere that I will try to find

    Box:
    MV automatics valve body
    Full manual controller (change gears off cruise control stick)
    4000rpm Dominator converter

    Accessories:
    Custom made inlet and exhaust manifolds
    EDIT: 1200cc injectors
    GT42 plain bearing turbo
    Turbosmart wastegate
    BOV
    6 coil conversion
    Microtech computer
    Dry shot nitrous kit
    Line locker
    VZ V8 radiator with custom thermo fan arrangement
    Remote mounted oil filter
    Big custom catch can
    Pod filter with custom air box
    Stupidly massive front mount (needs to be changed IMHO)

    Fuel system:
    Aeromotive fuel regulator
    Twin Walbro in tank fuel pumps
    Custom surge tank
    twin 044 fuel pumps
    Custom hard lines under car

    All fuel lines and engine bay is braided with anodised fittings (very $$$)

    Interior:
    All autometer gauges (incl tacho and speedo)
    Stock seats, etc (great condition)
    CD/MP3 player
    Sports steering wheel

    Also comes with stock 15in wheels, a spare front and rear bar, all front and rear lights.

    Has alot more done to it, this is just off the top of my head.








    Contact me at:

    blackbart22@hotmail.com

    or PM me here.
    Last edited by blackbart; 17-01-10 at 04:38 PM.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  2. #2
    Opens 7HEAVN's Avatar
    Join Date
    Nov 2001
    Location
    Sydney
    Posts
    2,187
    interesting pm coming your way mick
    ser5 rx7
    20B power 500rwhp @ 15 psi pump fuel more to come
    10.3@134mph


    www.castlehillperformance.com.au

  3. #3
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    On Cressida forum for $14k. Discount for PF members if you use the magic word.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  4. #4
    Its got what plants crave Lobster's Avatar
    Join Date
    May 2002
    Location
    Canberra
    Posts
    5,056
    Quote Originally Posted by blackbart View Post
    On Cressida forum for $14k. Discount for PF members if you use the magic word.
    "Cunt"?
    Previously known as Lobster, Chuss's brother's anus, Chuss's brother, Lobsook, Lobstersock, Socks, Sockz, MissAmericaImportGirl, ClutchCLobster

    CJM 4 Life yo!

  5. #5
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    You got it!
    2001 Honda CBR600F4i
    1998 Toyota Prado

  6. #6
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    2001 Honda CBR600F4i
    1998 Toyota Prado

  7. #7
    BLING BLING PLAYA's Avatar
    Join Date
    Mar 2002
    Location
    adelaide
    Posts
    4,973
    didnt u pick this up for like 3 bucks?
    I design and sell the following:

    www.iqengineering.com.au
    -RB30 into GTR sump adapters
    -Engine mounts - urethane and perfect for all conversions
    -SR20 to RB25 bell housing conversions
    -Can do any 3D design and modelling at competitive rates.

    Coming Soon:
    Holden 5L 4 bolt main caps and full one piece girdle.
    Hydraulic tilt tray trailers, lowest approach angle in the industry, suspension, control it from your Android or Iphone....ETA 2 months

  8. #8
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    It was $4.50. No paid a bit for it and ended up spending double what I expected to fix the gearbox prob. An asking price is an asking price. I will accept less. Got to start somewhere.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  9. #9
    BLING BLING PLAYA's Avatar
    Join Date
    Mar 2002
    Location
    adelaide
    Posts
    4,973
    ill def offer $8.50
    I design and sell the following:

    www.iqengineering.com.au
    -RB30 into GTR sump adapters
    -Engine mounts - urethane and perfect for all conversions
    -SR20 to RB25 bell housing conversions
    -Can do any 3D design and modelling at competitive rates.

    Coming Soon:
    Holden 5L 4 bolt main caps and full one piece girdle.
    Hydraulic tilt tray trailers, lowest approach angle in the industry, suspension, control it from your Android or Iphone....ETA 2 months

  10. #10
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    I'll file that offer appropriately.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  11. #11
    BLING BLING PLAYA's Avatar
    Join Date
    Mar 2002
    Location
    adelaide
    Posts
    4,973
    lol
    I design and sell the following:

    www.iqengineering.com.au
    -RB30 into GTR sump adapters
    -Engine mounts - urethane and perfect for all conversions
    -SR20 to RB25 bell housing conversions
    -Can do any 3D design and modelling at competitive rates.

    Coming Soon:
    Holden 5L 4 bolt main caps and full one piece girdle.
    Hydraulic tilt tray trailers, lowest approach angle in the industry, suspension, control it from your Android or Iphone....ETA 2 months

  12. #12
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    Already had four offers. Three from ebay bots and one legit one to swap for a ski boat.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  13. #13
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    Nearly finished on ebay. Reserve has been lowered and if it hits a certain amount (even under the reserve) I'll sell it. Need the money for a rollcage for the tonner!
    2001 Honda CBR600F4i
    1998 Toyota Prado

  14. #14
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    $11,990 or near offer. Either it goes in the next week or I'll keep it. Will discount for PF buyer.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  15. #15
    HoonTV RotaUte's Avatar
    Join Date
    Apr 2002
    Location
    Phucknose
    Posts
    4,425
    I'd consider swapping it for my Landrover, if you say the magic word
    Newest member of the PF divorce club

  16. #16
    www.MotorSportFotos.com Southo's Avatar
    Join Date
    Nov 2001
    Location
    Sydney, NSW
    Posts
    6,263
    Umm, Boxer, I didn't realise that banks take Cressidas as deposits for a houses nowadays :P

  17. #17
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    Nah, I'm after something normal and cheap as a replacement.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  18. #18
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    Someone buy this before I start spending money on it again!

    Open to offers over $8.50.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  19. #19
    Pastafarian Monk's Avatar
    Join Date
    Oct 2002
    Location
    Brisvegas
    Posts
    5,380
    $8.55?

  20. #20
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    On ebay for the last time! If it doesnt sell this time I'll keep it and finish it off. Cant have too many quick cars.

    1989 Toyota Cressida turbo MX83 big power drag street - eBay, Passenger Vehicles, Cars, Cars, Bikes, Boats. (end time 23-Aug-09 20:21:05 AEST)
    2001 Honda CBR600F4i
    1998 Toyota Prado

  21. #21
    The letter g Sucker's Avatar
    Join Date
    Apr 2007
    Location
    Somewhere in Straya
    Posts
    3,662
    Swap for a basketball?

    No race cars

  22. #22
    Opens HoonBoy's Avatar
    Join Date
    Nov 2001
    Location
    Sydney, Australia
    Posts
    9,816
    No reserve?

    Swap for VR Commodore, some panel damage

  23. #23
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    Quote Originally Posted by Sucker View Post
    Swap for a basketball?
    If its worth more than $10000 then yes.

    Quote Originally Posted by HoonBoy View Post
    No reserve?

    Swap for VR Commodore, some panel damage
    Nah no reserve. I want at least a couple of grand more than the starting price but if I keep it I'll spend another 3 grand on it easy.

    Only swap would be for a VX or newer SS (or HSV) six speed.

    Bought a normal daily so Ive gone back to 4 cars, again.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  24. #24
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    Not able to find the time or motivation for this one. Auto let go on the dyno with the nitrous. I have a replacement box and all it needs is the MV valve body fitted and the box put in.

    Considering reasonable offers at this point.

    If I still have it in January I'll fix it.

    Getting rid of all my modified cars and getting one decent one.

    The converter has been fixed and is back in the car. Gets to 4000rpm nicely. Speedo is wired up and works, just needs to be calibrated. And the nitrous and line locker are wired up and working a little too well.

    Made 451rwhp on 24psi. Gave the nitrous a test and managed to pop the standard (except for valve body) auto trans! Got another one to go in and may be getting a spare. Will be fine without the nos for now lol.

    Also going to be in Zoom in early December.

    Found the list from the previous owner/builder too:

    Eagle H beam forged steel conrods
    Crank ground to 010, destressed and shotpeened
    ARP head studs
    ARP main studs
    Standard 7MGE block bored .020, decked and line honed
    Stainless valves
    Crow valve springs
    Brian Crower 272 deg cams
    head ported alot
    sheet alloy inlet manifold with bell mouths
    steam pipe exhaust manifold
    turbosmart 45mm progate
    Kometic head gasket
    Gates timing belt
    GT42 turbo (plain bearing)
    Auto gearbox controller
    2x walbro in tank fuel pumps
    2x Bosch 044 fuel pumps
    2x -8 hard fuel lines
    8 litre surge tank
    custom catch can
    custom radiator overflow bottle
    custom alloy cooler piping
    custom air filter box
    B&M line locker
    NOS dry shot nitrous kit
    Custom front mount intercooler
    VZ V8 Commodore aluminium radiator
    Microtech LT10S computer with X6 box
    6X coils
    Microtech also has enlarged drivers and 3 bar map sensor
    Aeromotive rising fuel pressure regulator
    Turbo bag
    Autometer instruments (speedo, tach, oil press, volts, water temp, boost)
    3inch custom turbo back exhaust
    Dominator converter

    New pics!



    2001 Honda CBR600F4i
    1998 Toyota Prado

  25. #25
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    $9,999 tho still havent put the new box in so still a chance to pick this up cheap. Still taking reasonable offers.

    Magazine comes out in a couple of weeks. Get in before its fully sick.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  26. #26
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    Make a reasonable offer, you may be surprised.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  27. #27
    Registered User 1uzusee's Avatar
    Join Date
    May 2007
    Location
    QLD, Sunshine Coast.
    Posts
    5,101
    Is it a manual box by chance? (have no read thread sry)

    Expect what you inspect.
    -W. Edwards Deming

  28. #28
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    No.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  29. #29
    Opens blackbart's Avatar
    Join Date
    Nov 2001
    Location
    The block brudda
    Posts
    3,986
    $9,998.

    This week only a MASSIVE discount for it as is. Will also throw in a free set of steak knives!

    Otherwise will be changing box over early next year and keep advertising it at current price.
    2001 Honda CBR600F4i
    1998 Toyota Prado

  30. #30
    Opens 7HEAVN's Avatar
    Join Date
    Nov 2001
    Location
    Sydney
    Posts
    2,187
    Would have thought this thing would have sold by now.
    ser5 rx7
    20B power 500rwhp @ 15 psi pump fuel more to come
    10.3@134mph


    www.castlehillperformance.com.au

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •