haha so many cars, has to build a rack to store them. epic.
haha so many cars, has to build a rack to store them. epic.
Last edited by clutch-monkey; 18-06-13 at 07:39 PM.
I'll post pic's when the cars are on it.
GURU ENGINEERING PTY LTD
Ok, Graham just set up his new Spray booth/Oven and brought a 4WD Dyno Dynamics Dyno to keep everything for the Zs in one place. Yes I know Zs are 2wd but its just how it worked out.
One Z is to become 4wd anyway.
Talk about living the Dream.
GURU ENGINEERING PTY LTD
Yeah sounds like it. I think we need pics and regular updates
Ive taken some, will get onto it, 2 much been going on lately.
The Engine for the car in this thread is just about finished,Suspension is finished and final rims and tyres are on so its Flares and paint time now the Spray Booth is done.
GURU ENGINEERING PTY LTD
Motors almost done.
Tomei Turbos.
GURU ENGINEERING PTY LTD
Body works finished, All steel hand made Flares and wheel arch move farword by about 5 inches to clear all the Caster. Poor phone pic sorry. No bog.
GURU ENGINEERING PTY LTD
Moar pics please , I kenne see shit laddy
DJ's don't need sigs
Not a good pic again but Bodys getting close to paint. Wheels are just for moving around.
Every wall is being filled with Zs as they turn up,Will get pic's of all soon, Not sure of current count?
GURU ENGINEERING PTY LTD
great stuff. So you have increased the wheelbase forward by 5", other than to get extra caster which can be gained by angling the towers back, is there another reason for that? Obviously you know what you are doing but she will be arse heavy so I assume that is deliberate.
Richard's DatsunZ lappin LakesidZ http://www.youtube.com/watch?v=47OSh...&feature=g-upl
“Freedom of speech does not protect you from the consequences of saying stupid shit.”
― Jim C. Hines
“Everyone is entitled to his own opinion, but not to his own facts.”
― Daniel Patrick Moynihan
“Four hostile newspapers are more to be feared than a thousand bayonets..”
― Napoleon Bonaparte
I build on Corner weights and this is not Ass heavy, RB26 Large 25 Gearbox, large intercooler and Radiator plus the Powersteering keep the front and rear as good as 50/50. The Z Racecars Ive built all become much more Stable with the extra wheelbase. With final settings the rear wheels sit center of the new rear wheel arches giving quite a bit extra wheel base. Ive been building Z's for 30+ years and have won Championships with them so Ive worked them out quite well.
This car will run sub 60s at Garbagallo raceway.
GURU ENGINEERING PTY LTD
Radical stuff but it all makes sense, good thinking. From what I've seen a lot of modded S30's tend to be a bit bum heavy which is why the question was asked eg my 260 with a FJ20ET engine and gearbox, R180 diff. Not that a bit of extra bum weight is necessarily bad. Keep the info and pics coming.
Richard's DatsunZ lappin LakesidZ http://www.youtube.com/watch?v=47OSh...&feature=g-upl
“Freedom of speech does not protect you from the consequences of saying stupid shit.”
― Jim C. Hines
“Everyone is entitled to his own opinion, but not to his own facts.”
― Daniel Patrick Moynihan
“Four hostile newspapers are more to be feared than a thousand bayonets..”
― Napoleon Bonaparte
Mazda has been arseholed to another shed, cant keep Z's and FD's together the Z might contaminate the mighty chook cooker!
Mazda is where it should be, Down the back out of sight near all the other Junk.
GURU ENGINEERING PTY LTD
What's happening here?
Richard's DatsunZ lappin LakesidZ http://www.youtube.com/watch?v=47OSh...&feature=g-upl
“Freedom of speech does not protect you from the consequences of saying stupid shit.”
― Jim C. Hines
“Everyone is entitled to his own opinion, but not to his own facts.”
― Daniel Patrick Moynihan
“Four hostile newspapers are more to be feared than a thousand bayonets..”
― Napoleon Bonaparte