Page 47 of 47 FirstFirst ... 374344454647
Results 1,381 to 1,398 of 1398

Thread: Open Wheeler Toy

  1. #1381
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    2,091
    Click image for larger version. 

Name:	IMGP0940.JPG 
Views:	35 
Size:	2.90 MB 
ID:	112053

    Click image for larger version. 

Name:	IMGP0941.JPG 
Views:	33 
Size:	2.90 MB 
ID:	112054

    Click image for larger version. 

Name:	IMGP0942.JPG 
Views:	29 
Size:	2.85 MB 
ID:	112055

    Click image for larger version. 

Name:	IMGP0944.JPG 
Views:	26 
Size:	2.82 MB 
ID:	112056
    " Racing cars don't have doors. Toilets have doors" : Keke Rosberg

  2. #1382
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    2,091
    After producing much swarf, I've got a couple of rear uprights, hubs and brakes that I can work with.

    I'll likely replace the cast iron Mazda brake caliper with a lighter Magna rear caliper and I need to finish making the piece between the wheel nut and the wheel. I need to pick up some round alloy stock to make that from.

    Because I was going to have to fit 5 wheel studs where there was nothing I decided I might as well engineer a single wheel nut into the equation, much thought, deliberation and concern went into the design of the piece. It does after all hold the wheel on, but not the disc, in the end I'm very comfotable with the result. I now need to create a very deep socket to fit the CV nut and a deep socket for the wheel nut. I reckon in due course the length of the wheel nut stud will be trimmed after I've finalised what wheels and tyres I decide to go with...

    Very pleased with progress, I need to continue on now with adapting the engine to the transaxle.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMGP0944.JPG 
Views:	28 
Size:	2.82 MB 
ID:	112057   Click image for larger version. 

Name:	IMGP0942.JPG 
Views:	35 
Size:	2.85 MB 
ID:	112058   Click image for larger version. 

Name:	IMGP0941.JPG 
Views:	35 
Size:	2.90 MB 
ID:	112059   Click image for larger version. 

Name:	IMGP0940.JPG 
Views:	33 
Size:	2.90 MB 
ID:	112060  
    Last edited by Roy928tt; 06-06-19 at 07:43 PM.
    " Racing cars don't have doors. Toilets have doors" : Keke Rosberg

  3. #1383
    Registered User clutch-monkey's Avatar
    Join Date
    May 2011
    Location
    brisbane
    Posts
    5,167
    https://www.whichcar.com.au/features...wF7-dlDK-PaMFw

    saw this and thought of you, your favourite engine in a HR!
    Quote Originally Posted by Walt Kowalski View Post
    Memes are only detectable by NSA.

  4. #1384
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    2,091
    Something had been bugging me for some time, The Hillclimb car has a concerning propensity for stepping out, if you are under power and it gives up traction it always steps sideways. I had long suspected the "LSD" and didn't know enough about it to be able to determine this for sure. This weekend I spent some time researching more about ZF Cam and Pawl differentials, and yes, it is the nature of the beast. They are completely unlocked until under power, then they lock completely. At the moment because the limit of the tyres is so low it means that as the tyres let go it steps sideways with quite some determination. I can only hope that with some tyres with grip we can channel more power into forward motion rather than sideways. The diff will in time wear out and then become a completely open diff.....
    " Racing cars don't have doors. Toilets have doors" : Keke Rosberg

  5. #1385
    Registered User
    Join Date
    Jan 2006
    Location
    australia
    Posts
    585
    I found that the cam and pawl diffs when they wore out would start knocking edges off and then lock and unlock randomly.
    Great diff when they were new but wear quickly (in circuit anyway)
    Originally Posted by Tut
    THEY SHOULD ANALYY RAPE THEMSELVES WITH A FUCING CACTUS UPSIDE DOWN WITH COCONIUTS AND PINEABPPLES AS CHRISTMAS BALLS THE FUCKNIG THIEVENG CUNTS ID RATHER DIE FROM HAVING A RAINBOW UNICORN URETHRALLY RAPE ME THAN TO FUCKNIG DO BUSINESS WITH THEM CUTNST EVER AGAN

  6. #1386
    Opens
    Join Date
    Jan 2002
    Location
    Brisbane, QLD
    Posts
    9,620
    open wheeling toy?

  7. #1387
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    2,091
    Lol!
    " Racing cars don't have doors. Toilets have doors" : Keke Rosberg

  8. #1388
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    2,091
    Click image for larger version. 

Name:	IMGP0945.JPG 
Views:	25 
Size:	2.68 MB 
ID:	112207

    Very Happy with how this all turned out (no pun intended)
    " Racing cars don't have doors. Toilets have doors" : Keke Rosberg

  9. #1389
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    2,091
    Faaarking tyres !!!!

    So there is a tyre war starting up in the UK Hillclimbing scene, Pirelli are entering the fray......there have been some bargain used Avon tyres hitting the market......buying them with South Pacific Pesos inflates the price, but that is just the way of the world.....shipping! fark! such a variance in prices and all of them make shipping 2nd hand tyres across the globe utterly pointless.

    'Tis a pity, I'd found a perfect pair of front tyres and with the rears on their way I thought things were looking up on the tyre and grip front.

    Off the back of that setback I thought I'd call Gordon Leven Tyres, last time I spoke to them...last year, their word was mid May, we will call you. Being mid June and having heard nothing ....... "No, no tyres of that size on the shipping list.....Ah! here they are on the order, but they have not shipped." So, I've been waiting for something that will not arrive.... Apparently Avon simply didn't put them in the sea container.

    A fellow competitor gifted me a pr of Hankook wets, they certainly feel softer and stickier than what we have been running on the front, so I've popped them onto the front wheels, I will now have to reset the front ride height & etc but that will bring the front end closer to the geometry it was designed to have so I'm hoping that will only bring improvement.

    On the rear I started casting around for something...anything... Hoosier make a dirt speedway tyre in the size required, so I've decided that for $600 I'll try a pair of those on the rear. The bloke that sells them reckons they will grip like nothing I've experienced but isn't sure about how the car will feel on to of them, they have a really loose sidewall. MEH ! what have I got to lose.....

    One of the other things I notice is that the newly fitted front tyres are almost twice the weight of the ones removed, yuck. And the speedway tyres will be lighter again, I'm not sure how that will change things or if I can tell a difference at all.....

    I'm quite cheesed off with the cost and hassle of faffing around with tyres. Tyres in so many different diametres and widths and then there are different compounds and construction. Closer to home of course the car has different wheel fitment front and rear and I only have 3 wheel widths all in only 13" diametre......

    After the construction of the car and achieving a nice power to weight and being able to work my way around most engineering challenges, I'm finding this tyre challenge something I can't get to the bottom of with ingenuity it seems cash is going to be the solution to this dilemma, and I don't like it!
    " Racing cars don't have doors. Toilets have doors" : Keke Rosberg

  10. #1390
    Registered User
    Join Date
    Jan 2006
    Location
    australia
    Posts
    585
    One of the guys uses hoosier speedway dirt tyres on his motorkhana special.
    They are soft as butter and look ok. Id say they will be a big improvement over the tiles you are running now.
    Originally Posted by Tut
    THEY SHOULD ANALYY RAPE THEMSELVES WITH A FUCING CACTUS UPSIDE DOWN WITH COCONIUTS AND PINEABPPLES AS CHRISTMAS BALLS THE FUCKNIG THIEVENG CUNTS ID RATHER DIE FROM HAVING A RAINBOW UNICORN URETHRALLY RAPE ME THAN TO FUCKNIG DO BUSINESS WITH THEM CUTNST EVER AGAN

  11. #1391
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    2,091
    Yeh, the Hoosier seller was telling me that, same style of tyre I'm getting. I figure if they don't roll of the rim in motorkhana use they will likely be fine for my use.
    " Racing cars don't have doors. Toilets have doors" : Keke Rosberg

  12. #1392
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    2,091
    Brrr..'twas a chilly start to the day at Collingrove, frost on the ground everywhere.

    Fortunately the day, whilst never really warm, was just fine. The car shrugged off the cold by starting on the button, unlike some.

    We got a full day of 9 runs, I bumbled along mostly in the 36's whilst young David reveled in the new found front end grip and went faster, he recorded a couple of runs in the 34's but must have touched a marker in both runs as they were not counted. Still nice to know that the car has it in it.

    I had been suggesting to him that he try leaving the line in 2nd gear, he bounced it back to me ( see nobody wanted to stall the car.....) So I tried it, bloody hell! it pops off the line in 2nd as easily as it does in 1st, no gearchanges and a faster first split. So that was a good thing, legend has it that Holinger did this years ago, but he had a 5 litre Repco Brabham....

    Looks like that is an avenue that we will have to go down, picking just the right ratio to achieve it.
    " Racing cars don't have doors. Toilets have doors" : Keke Rosberg

  13. #1393
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    2,091
    Which had us pondering what the car was going to be like with a pair of soft speedway tyres giving us traction.

    I'm wondering how I'm going to be able to drive the bloody thing, it seems faster than my reflexes already! Maybe, hopefully it will calm the car down and there will be less requirement for reflexes?

    Either way, very much looking forward to a new traction paradigm.
    " Racing cars don't have doors. Toilets have doors" : Keke Rosberg

  14. #1394
    Chopped BigMuz's Avatar
    Join Date
    Nov 2001
    Location
    Eastern Australia
    Posts
    12,752
    Yeah we often used a single gear at the slower tracks, faster by miles if you can get it off the line.

    Sent from my SM-N950F using Tapatalk
    Retard Honour Wall.
    Quote Originally Posted by Sloth View Post
    Rob Sloth Young did i ask for your opinion? no. i only want it for a paddock bomb. go play with traffic.
    Quote Originally Posted by Fondles View Post
    you stupid fucken imbicle.
    Quote Originally Posted by Fondles
    your are a fucken idiot of the highest level.

  15. #1395
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    2,091
    So the tyre saga continues....Hoosier don't have the compound that I would prefer in stock, so I'll be getting the next harder one....next week.

    Meanwhile there is a thought of building the LS juan into a 2 seat open wheeler...because, short of messing with the car I've already got, to try to fit others in as drivers there is no other way of people experiencing the ride?
    " Racing cars don't have doors. Toilets have doors" : Keke Rosberg

  16. #1396
    Gas Turbine enthusiast da9jeff's Avatar
    Join Date
    Dec 2007
    Location
    Radelaide
    Posts
    5,711
    What about a McLaren M8 type of thing?

    Sent from my SM-G960F using Tapatalk
    Tow car/camping bus: 2011 D40 Navara ST

    Baby mobile: 2016 Nissan Qashqai

    75 Mini Clubman club racer - DCOE powah

  17. #1397
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    2,091
    I got drawn into a profitless job this week, replace the leg out of bed 6G72 in a '93 Pajero with a U-Pull-It Magna motor. It took quite some hours and caught me out at the last step.

    I lined the distributor rotor up with the No.1 spark plug terminal on the outside of the cap as I popped it into the hole in the head....and scratched my head for hours as to why it wouldn't start.... turns out the terminal inside the cap is in quite a different position! Figure this out and sort it out and it burst into life in the usual manner.

    When I got home from that job young David was in the shed messing with the Subaru transaxle from the little green car, he mentioned that he had applied to join PF but hadn't received approval? Anybody know what's the story there?

    When he gets onboard he can post video straight up here...

    The Fat 'n' Black Hoosiers have arrived and been mounted up, I'm feeling confident about these. Next sunday is the next time out to Collingrove, so we will soon see.
    " Racing cars don't have doors. Toilets have doors" : Keke Rosberg

  18. #1398
    Registered User Smudge's Avatar
    Join Date
    Apr 2014
    Location
    City
    Posts
    625
    Quote Originally Posted by Roy928tt View Post
    When I got home from that job young David was in the shed messing with the Subaru transaxle from the little green car, he mentioned that he had applied to join PF but hadn't received approval? Anybody know what's the story there?
    Post in Feedback/New member approval thread to speed things up? http://www.performanceforums.com/for...ember-approval
    He jerked off with the determination of someone within sight of Everestís summit, having lost all his friends and Sherpas, having run out of supplemental oxygen, but preferring death to failure.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •