Results 1 to 13 of 13

Thread: Brake rotors. 300mm x 28-32mm 4x114.3

  1. #1
    Registered User jimmyg's Avatar
    Join Date
    Mar 2009
    Location
    Bendigo, Vic
    Posts
    1,519

    Brake rotors. 300mm x 28-32mm 4x114.3

    After a rotor for a custom front brake setup for my shitter track car. Much Googles and ebays have not had any luck sadly.

    After 300mm Dia and 28 to 32mm thickness. Would be epic if they where 4x114.3 also but don't hold out much hope.

    Thanks PF you guys rock!
    Mmmmmmmmm beer.

    Quote Originally Posted by ALLMTR View Post
    You had one fucking job, Imran. One. Now look, there's Flibberty Gibbets all up in here, seeing straight through your ruse. One. Fucking. Job!

  2. #2
    Registered User THE CHIEF's Avatar
    Join Date
    Nov 2016
    Location
    Melbourne
    Posts
    189
    R33 gtst are 296mm and 30mm thick when new. 5 stud unfortunately but you may be able to get blanks and have them drilled.

  3. #3
    Registered User
    Join Date
    Jul 2015
    Location
    NZ/NSW
    Posts
    147
    Honda Accord/TSX
    05-08 impala
    Alfa 147
    Chrysler Voyager
    2006+ Fiat ducato
    Mondeo
    Cross 6 AWD Crewman
    ZC Vectra
    I30
    S Series Jag
    KIA Optima, Sedona, Grand Carnival

    none are 4x114.3 but some varied hat heights ... if 2pce DBA52510 or Stoptech 31.G3B.0071 or 28.001.1100

  4. #4
    Registered User jimmyg's Avatar
    Join Date
    Mar 2009
    Location
    Bendigo, Vic
    Posts
    1,519
    I sorta figured I was pushing shit up hill with 4x114.3

    It's a starting place thanks guys.
    Mmmmmmmmm beer.

    Quote Originally Posted by ALLMTR View Post
    You had one fucking job, Imran. One. Now look, there's Flibberty Gibbets all up in here, seeing straight through your ruse. One. Fucking. Job!

  5. #5
    Registered User fantapants's Avatar
    Join Date
    Apr 2009
    Location
    Devonport, Tasmania Australia
    Posts
    1,780
    Random thought that may or may not be any use.

    But 3t in the states comparing a big brake kit for the ae86 boys with a 300mm 2piece rotor. Not sure on width but 28 sounds right and they are 4x114.3 ... Could be a start also mate

    Sent from my HTC 2PS6200 using Tapatalk
    RIP Carly - a smile to light the world.
    06/07/2011

    http://www.performanceforums.com/for...#post842594902 - making little toys for the big boys

  6. #6
    Boob dude to4garret's Avatar
    Join Date
    Feb 2005
    Location
    Perth
    Posts
    700
    I have a set of new 320mm x 32mm in 4x 114.3 collecting dust if that would help. I went a two piece wilwood in the end that you could probably get a 300mm disc for.

  7. #7
    Registered User jimmyg's Avatar
    Join Date
    Mar 2009
    Location
    Bendigo, Vic
    Posts
    1,519
    Wow! To many options to fast! See what I can work out and go from there.
    Mmmmmmmmm beer.

    Quote Originally Posted by ALLMTR View Post
    You had one fucking job, Imran. One. Now look, there's Flibberty Gibbets all up in here, seeing straight through your ruse. One. Fucking. Job!

  8. #8
    Registered User
    Join Date
    Jul 2015
    Location
    NZ/NSW
    Posts
    147
    what caliper are you using and pad annulus/depth? I'd go the 2pce setup, as DBA wont sell you blanks unless usually a 50pair order, so unless you can find one with 4x114.3 and the right hat height its going to be a little tough. 2pce you can set it up accurate. but with a larger outlay up front.
    28.001.1100 has annulus of 42.3mm, 31.G3B.0071 is 50.75mm and the DBA 52510 is 54mm and 52919 is 41mm

  9. #9
    Registered User jimmyg's Avatar
    Join Date
    Mar 2009
    Location
    Bendigo, Vic
    Posts
    1,519
    Found these with you guys help thankyou. Should JUST squeeze under 16" wheels. I will make my 4 piston wilwood's rear calipers now.

    http://www.ebay.com/itm/WILWOOD-DISC...item3f1f9ad5e2

    Was hoping to stay 15" wheels but fuck it 16's with 45/50 profile tires it will be fine.

    PS Thanks T04garret for your kind offer.
    Mmmmmmmmm beer.

    Quote Originally Posted by ALLMTR View Post
    You had one fucking job, Imran. One. Now look, there's Flibberty Gibbets all up in here, seeing straight through your ruse. One. Fucking. Job!

  10. #10
    Registered User fantapants's Avatar
    Join Date
    Apr 2009
    Location
    Devonport, Tasmania Australia
    Posts
    1,780
    Just an FYI the t3 brake kit fits under most 15inch wheels... But either way keen to see how it shapes out man...

    Sent from my HTC 2PS6200 using Tapatalk
    RIP Carly - a smile to light the world.
    06/07/2011

    http://www.performanceforums.com/for...#post842594902 - making little toys for the big boys

  11. #11
    Registered User jimmyg's Avatar
    Join Date
    Mar 2009
    Location
    Bendigo, Vic
    Posts
    1,519
    Sweet! Thanks FP. Going to be a tight fit. In time it will be an update in my shitbox track car build thread. No more RIP brake, kitty litter fun for me anymore. Maby.
    Mmmmmmmmm beer.

    Quote Originally Posted by ALLMTR View Post
    You had one fucking job, Imran. One. Now look, there's Flibberty Gibbets all up in here, seeing straight through your ruse. One. Fucking. Job!

  12. #12
    Registered User Mr Purple's Avatar
    Join Date
    Feb 2004
    Location
    Brisbane
    Posts
    3,291
    180mm radius might be a bit tight for the 6 piston on a 15 inch. I'm assuming I'm too late and you've already purchased; the four piston only need 153mm.

    http://www.ebay.com/itm/WILWOOD-DISC...3D271113180642

    Have spent far too much time checking and rechecking the clearance of mine on the Valiant's 15 inch wheels!

  13. #13
    Registered User jimmyg's Avatar
    Join Date
    Mar 2009
    Location
    Bendigo, Vic
    Posts
    1,519
    Your not to late MP. Limited budget means anything I do is done with plenty of time for reflection and adaption.

    Looks like I've got some more work to do. Thankyou.
    Mmmmmmmmm beer.

    Quote Originally Posted by ALLMTR View Post
    You had one fucking job, Imran. One. Now look, there's Flibberty Gibbets all up in here, seeing straight through your ruse. One. Fucking. Job!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •