Results 1 to 10 of 10

Thread: L76 and 6L80e Stand alone harness

  1. #1
    Registered User 18htan's Avatar
    Join Date
    Feb 2009
    Location
    Melbourne
    Posts
    640

    L76 and 6L80e Stand alone harness

    I have searched through a few threads but am none the wiser.

    I am converting a L76 and 6l80e into a 63 Belair. I will be running the VE shifter also

    So my options are converting the factory system or buying off the shelf.

    This looks like what I need.
    https://www.psiconversion.com/products/standalone-wiring-harnesses

    Any PF hook ups for a plug and play setup? Converting mine or new.

    I want the ECU under the dash, not the front right corner like the VE. So this might make converting mine more cunty
    Last edited by 18htan; 08-07-17 at 04:16 PM.

  2. #2
    sack riding 10sec rx7's Avatar
    Join Date
    Nov 2001
    Location
    Sydney
    Posts
    17,573
    your going to be paying big bucks as its going to have to be a full custom harness..
    im a cunt
    and apparently i dont know shit...

  3. #3
    Registered User 18htan's Avatar
    Join Date
    Feb 2009
    Location
    Melbourne
    Posts
    640
    I get that...

    But the PSI setup is all under dash and less than 1k US.

    Tell me more

  4. #4
    Goat roper Motherfucker Jones's Avatar
    Join Date
    Jun 2011
    Location
    Struggletown
    Posts
    6,441
    PM mxpaul. He does a bit of this stuff
    Quote Originally Posted by RVK 355 View Post
    Hold it flat cunt

  5. #5
    Registered User 18htan's Avatar
    Join Date
    Feb 2009
    Location
    Melbourne
    Posts
    640
    PM Sent.

    Interested in hearing what others have done.

    Is the PSI setup any good? They get a good write up, although I appreciate they are not local.

    Who is making custom looms in Oz?

  6. #6
    Registered User
    Join Date
    Dec 2007
    Location
    Sydney, Australia
    Posts
    823
    Nothing to add but if you do order, you may aswell get this at the same time, makes plumbing the fuel system easy

    https://www.psiconversion.com/produc.../ACC-1028.html
    Quote Originally Posted by race6.3l
    Only gripes are the bluetooth and stereo are bread and butter spec, not one person has been able to hear me properly during a call, even with my head all contorted towards the roof mounted microphone like im trying to growl a chic sitting on a clothesline

  7. #7
    are hairy Dogsballs's Avatar
    Join Date
    Nov 2010
    Location
    melbourne
    Posts
    6,907
    Fuck, big job to rewire that. I'd do it yourself

    Sent from my Nexus 6 using Tapatalk
    Quote Originally Posted by 50RTD View Post
    Dave, have you uploaded the data from the carby?

  8. #8
    Registered User 18htan's Avatar
    Join Date
    Feb 2009
    Location
    Melbourne
    Posts
    640
    Quote Originally Posted by Dogsballs View Post
    Fuck, big job to rewire that. I'd do it yourself

    Sent from my Nexus 6 using Tapatalk
    I am sure you are working out that I am fucking retarded with this shit.

    So me doing the rewire is out of the question.

  9. #9
    Registered User 18htan's Avatar
    Join Date
    Feb 2009
    Location
    Melbourne
    Posts
    640
    Quote Originally Posted by ITS60S View Post
    Nothing to add but if you do order, you may aswell get this at the same time, makes plumbing the fuel system easy

    https://www.psiconversion.com/produc.../ACC-1028.html
    Thanks mate

  10. #10
    are hairy Dogsballs's Avatar
    Join Date
    Nov 2010
    Location
    melbourne
    Posts
    6,907
    Just one wire at a time. Not that difficult

    Sent from my Nexus 6 using Tapatalk
    Quote Originally Posted by 50RTD View Post
    Dave, have you uploaded the data from the carby?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •