Results 1 to 7 of 7

Thread: Toyota Supra (JZA80), 2JZ-GTE VVTi, Greddy T78-33D, R154 Gearbox

  1. #1
    Registered User
    Join Date
    May 2005
    Location
    Brisbane
    Posts
    6

    Toyota Supra (JZA80), 2JZ-GTE VVTi, Greddy T78-33D, R154 Gearbox

    For Sale, 1995 model Toyota Supra (JZA80) with 2JZ-GTE VVTi, Greddy T78-33D turbo & R154 5 speed manual transmission.

    137,xxxkm on chassis. Imported / complied in 2006 as non-turbo (2JZ-GE, W58) and converted to VVTi turbo with R154 gearbox.

    Air Conditioning, ABS, power windows, power steering, cruise control (ex JZZ30 Soarer). No airbags.
    Dyno Sheet for 300rwkw.

    It’s a great car, and it recently drove from Brisbane to Mount Isa without issue. Sadly I don’t seem to have the time these days to give the car the love and attention that I feel it deserves, so it is time send it to a new home.

    Car is currently located in Mount Isa, Queensland. Can look at delivering / arranging transport Australia wide. Give me a call to discuss.
    Note: personalised number plates are not included in sale.

    Price: $20,000
    Contact William, 0438 426 320.

    Details:
    • 2JZ-GTE VVTi – from a JZS161 Aristo, unknown km but inspected as very clean internally when replacing sump / inspecting camshafts (refer photos).
    • Greddy T78-33D Turbo with Aeroflow Turbo Bag
    • Greddy Type R Wastegate
    • ebay stainless manifold with extra bracing
    • K&N 4” Air Filter (RE-0870)
    • SARD 800CC side feed injectors (63564) – OEM fuel rail modified for dual feed
    • Dual Walbro GSS341 Pumps
    • Turbosmart FPR800 Fuel Pressure Regulator
    • OS Giken Adjustable Exhaust Cam Gear
    • 1NZ Coil On Plug (COP) Ignition
    • 600 x 300 x 100 Front Mount Intercooler with Stainless Steel Intercooler Piping
    • Greddy Type R BOV
    • Greddy Oil Catch Can
    • Adpatronic e420c Standalone Engine Management
    • TechEdge 2J1 Wideband O2 Sensor
    • Alloy Radiator
    • TRD Strut Tower Bar
    • 3.5” Stainless Exhaust and Magnaflow muffler with wastegate plumbed back

    • R154, 5 Speed Manual Gearbox – JZX110 Shifter mechanism, RAZO Shifter Knob
    • HKS GD Max Twin Plate Clutch – Pull Type, Sprung hub
    • OEM Torsen LSD (A01B)
    • OEM Bilstien Shock Absorbers
    • Slotted Front Brake Disks
    • Custom Asus Eee PC (701) in dash install
    • 320khp TRD Speedometer (TRD 8311-JA800)
    • Defi Link Gauges – White
    o Defi Boost Pressure Gauge (DF09901)
    o Defi Oil Pressure Gauge (DF10201)
    • B&M Fuel Pressure Gauge
    • Oil Temperature Sensor (Connects to Adaptronic)
    • In Gear Electronic Boost Control via Adaptronic & Apexi Solenoid
    • Nardi Personal Steering Wheel
    • Mitsuba Arena Horn (MBW2E13R)
    • Pioneer DEH-P6050UB Stereo – Modified for remote mount faceplate
    • Fire Extinguisher
    • LED Dash & Interior Bulbs
    • Polished Interior Plastics
    • Recaro SR3 Drivers Seat

    • Glass Headlights
    • Spoiler Removed
    • Wheels & Tyres
    o OZ Racing, 3 Piece
    o Front: 18x8.5+38, Federal 595SS Tyres, ~4mm tread depth
    o Rear: 18x10+38, Federal 595SS Tyres, ~7mm tread depth
    • Rolled Rear Guards

    Issues:
    There are some issues given the age of the car, however overall it is in very good condition, I have detailed most of the issues below,
    • Paint work:
    o Quite average on the bonnet, roof and top of hatch predominantly – due to smelter “fallout damage”. Spots of clear coat damage etc. See dropbox photos.
    o Has been keyed on drivers door and drivers rear quarter panel.
    o Paint marks where spoiler was previously mounted.
    o Paint cracked (looks to be under the clear coat) on the passenger side of the rear bumper.
    o Fading on mirrors and front bumper.
    • Driver’s seat has some wear where the seatbelt goes, and the lower right bolster foam would benefit from replacement.
    • Stereo DISP & S.Rtrv buttons don’t work on head unit face (Can use DISP on remote).
    • Wheel dress sections (that can be removed) have gutter rash. Two wheel centre caps missing. Some paint coming off near the wheel nuts.

    Links:
    • Toymods Build Thread:
    o http://www.toymods.org.au/forums/thr...-Wilbo-s-JZA80
    • Photos:
    o Photos
    • Parts:
    o http://www.greddy.com/products/turbo...model:T78-33D/
    o http://www.greddy.com/products/turbo...model:Type+R+/
    o https://www.sard.co.jp/after_eng/pro...or_syasyu.html
    o http://www.turbosmart.com.au/product/fpr-800
    o http://www.otomoto.com.au/p/4116510/...-os-giken.html
    o https://shopgreddy-com.myshopify.com/products/11501660
    o http://wbo2.com/2j/2j1.htm
    o https://www.nengun.com/hks/gd-clutch-max
    o http://www.defi-shop.com/products/en.../summary_dlbf/
    - https://www.nengun.com/defi/link-met...rbo-max-200kpa
    - https://www.nengun.com/defi/link-met...f-oil-pressure
    o http://www.pioneer-latin.com/en/prod...050ub-138.html
    o http://www.suprastore.com/toyglashead9.html





















    Link to many more photos below,
    <Photos>

    Price: $20,000
    Contact William, 0438 426 320.
    Last edited by wilbo666; 17-02-18 at 01:17 PM.

  2. #2
    Registered User
    Join Date
    May 2005
    Location
    Brisbane
    Posts
    6
    Revised price.

    Cheers
    Wilbo

  3. #3
    Registered User bigshipengine.jpg's Avatar
    Join Date
    Dec 2010
    Location
    Wollongong
    Posts
    7,199
    Damn! thats not bad.
    It Places the lotion in the basket!

  4. #4
    Purist, whats that? Jason Broadhurst's Avatar
    Join Date
    Nov 2003
    Location
    North Brisbane
    Posts
    6,406
    Been a while since I've seen the dam that full
    Jason Broadhurst

    Someone once asked me if they could use my mower. I said "sure, so long as it doesn't leave my yard"

  5. #5
    Registered User
    Join Date
    Aug 2014
    Location
    Australia
    Posts
    12
    Came here to say thanks for the website, used it heaps!

    Good luck with the sale

  6. #6
    Purist, whats that? Jason Broadhurst's Avatar
    Join Date
    Nov 2003
    Location
    North Brisbane
    Posts
    6,406
    Do you live on the hill near haymans? I thought I saw this early one morning OMW to work.
    Jason Broadhurst

    Someone once asked me if they could use my mower. I said "sure, so long as it doesn't leave my yard"

  7. #7
    Registered User
    Join Date
    May 2005
    Location
    Brisbane
    Posts
    6
    Quote Originally Posted by Jason Broadhurst View Post
    Do you live on the hill near haymans? I thought I saw this early one morning OMW to work.
    Nah, closer to the racecourse

    Cheers
    Wilbo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •