Results 1 to 16 of 16

Thread: brake line tools. What's not crap (hard lines)

  1. #1
    free hugs! Paddington's Avatar
    Join Date
    May 2003
    Location
    Under a BMW
    Posts
    6,215

    brake line tools. What's not crap (hard lines)

    Have seriously had a brain meltdown and totally stuffed the front brake lines on a project so I need to make new hard lines.

    It's a 70's mazda and the brake tubing is 5mm OD. NFI what the thread pitch is on the fittings.

    Where can I get some tubing from (ideally in Melb or have it shipped) and where can I get a decent non crap brake hard line bending tool and then a flaring tool? I need to make two front lines for this project and then a few more for another.
    Quote Originally Posted by Stix Z
    i'm upset i lost that video of that aboriginal woman taking a dump on a train that was on youtube
    Quote Originally Posted by Jim
    Sorry, am late to this thread. I have been protesting against whitey oppressors all morning with my people. I shall serenade this thread with my didge until nash comes in and puts it all into perspective.

  2. #2
    Registered User Shane001's Avatar
    Join Date
    Jul 2007
    Location
    Sydney, Australia
    Posts
    930
    I just used my roll cage to bend my brake lines. Was only using standard bundy tube but worked fine and easier to get the exact bends where I wanted them then using a bending tool. Just pull the tube around the bars and bends perfect. Can even do full 180's.

  3. #3
    Unregistered User Permit Roadsailing's Avatar
    Join Date
    Aug 2003
    Location
    melbourne
    Posts
    5,809
    I managed OK with the cheapest bender and flaring tool money could buy from eBay (was black with red handles), hard line should be easy to find, just google or ring around.

    EDIT: similar to

    https://www.ebay.com.au/itm/180-3-in...gAAOSwUwFaQhBp

    and

    https://www.ebay.com.au/itm/Flaring-...IAAOSwsTxXkinB

    I think the flare tool was cheaper than that worth getting a better one as it took a fair bit of fucking around to get workable flares. Was good for putting bards on fuel line too though.
    Last edited by Roadsailing; 16-04-18 at 08:37 PM.

  4. #4
    Pollitically incorrect
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    7,233
    Reece/ tradelink etc etc?
    .... because every driver experiences the destructive potential of the effortless surge of power available through the smallest of body movements.

    Dr Hoon
    .

    DrNick is king!!!! No, Mark Webber is now! Long live the king!... hold on a minute mate, Ricci is in charge now

  5. #5
    free hugs! Paddington's Avatar
    Join Date
    May 2003
    Location
    Under a BMW
    Posts
    6,215
    There's a brake place in Derrimut that has everything... but they only do wholesale. Fuckers.
    Quote Originally Posted by Stix Z
    i'm upset i lost that video of that aboriginal woman taking a dump on a train that was on youtube
    Quote Originally Posted by Jim
    Sorry, am late to this thread. I have been protesting against whitey oppressors all morning with my people. I shall serenade this thread with my didge until nash comes in and puts it all into perspective.

  6. #6
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    10,189
    I have a dual action flarer and bending tool. Also ABS chains sell the ferrules and bundy.
    Chris
    ------
    I cant get no sleep...
    AE86 race car thread is finally up to date | Supposedly i have a new daily project too
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  7. #7
    xxxx BoboTheMonkey's Avatar
    Join Date
    Jul 2016
    Location
    past the berrimah line
    Posts
    28
    trailer shops sell pre-made lengths

  8. #8
    Boldy going nowhere rolin7's Avatar
    Join Date
    Mar 2006
    Location
    Not Mt Druitt
    Posts
    1,140
    Any brake shop should be able to sell you a length of 6 metre bundy tube.

    I just bought a roll off these guys -> https://www.ebay.com.au/itm/x-TRAILE...D/251866647234

    Flaring tools aren't worth buying unless you buy the good ones for around $350, have used this model and they make it so easy -> https://www.eastwood.com/professiona...ring-tool.html Alternative is just bend the lines and take them to a brake shop to flare.

    For the 90 bends, use a glass for non tight bends, for everything else, buy one of these -> https://www.ebay.com.au/itm/Mini-Tub...1/292144807549
    Pain is temporary, quitting is forever - Lance Armstrong (drug cheat)

  9. #9
    Unregistered User Permit Roadsailing's Avatar
    Join Date
    Aug 2003
    Location
    melbourne
    Posts
    5,809
    this looks good for the price, no experience with this type but it looks harder to make than the one I linked above so i guess it will work better. https://www.ebay.com.au/itm/Genuine-...QAAOSwB9JZciRz
    Last edited by Roadsailing; 16-04-18 at 08:52 PM.

  10. #10
    Title pending
    Join Date
    Aug 2002
    Location
    Perth
    Posts
    2,877
    Pro tip
    Find a brand of bundy called Reliance... its distributed by Brake Parts Aust in QLD
    Nice stuff... easy to flare and bend... won't even need a bender
    And buy a decent flare tool... like the Eastwood vice mounted one... if your going to do flares in the future

    If your doing a few quick jobs... that $52 one will do
    Location Perth Western Australia

  11. #11
    25 schmeckles? Do the safety dance.'s Avatar
    Join Date
    Apr 2002
    Location
    Sydney
    Posts
    4,280
    I recently got that cheapo one posted above. Works great for the price, much quicker to use than my more expensive universal pipe flaring kit.

  12. #12
    BOOSTFARKIN
    Join Date
    May 2012
    Location
    Australia
    Posts
    605
    Those ebay black red specials suck balls... ok for 1 or 2 occasional uses but not overly great ..

    ie thread on the screw thing galled up pretty much straight away drilled and tapped it out machined a larger bolt to size and the cone on the end will not stop spinning when doing the second part of the flare.

    The good part is very small length needed to do the flare.

    Ive got a real old school meco one also that is well worn but does the job


    Ive got a bender from repco is like a set of pliers that wraps the pipe into a die.

  13. #13
    Opens
    Join Date
    Jan 2002
    Location
    Brisbane, QLD
    Posts
    9,114
    Ive got a wurth turret flaring tool, but im planning to buy one of these too.

    Would making on-car changes way easier. $40 is dumb cheap..

    https://www.ebay.com.au/itm/jimy-Pro...19.m1438.l2649

  14. #14
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    10,189
    Quote Originally Posted by tim510 View Post
    Ive got a wurth turret flaring tool, but im planning to buy one of these too.

    Would making on-car changes way easier. $40 is dumb cheap..

    https://www.ebay.com.au/itm/jimy-Pro...19.m1438.l2649
    Damn, that is pretty good. Especially given the price.
    Chris
    ------
    I cant get no sleep...
    AE86 race car thread is finally up to date | Supposedly i have a new daily project too
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  15. #15
    Registered User
    Join Date
    May 2003
    Location
    Brisbane
    Posts
    409
    Same price at Supercheap too. So if member/trade you get it for less.

    We had a guy come in to do a cut and shut on an abraded brake hard line
    and when he left he went straight next door to Supercheap and bought one.

    Its a direct copy of the Eastwood one.

    edit. or is it the Toledo one, one of them anyway
    Radical SR3
    HSV R8

  16. #16
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    10,189
    Quote Originally Posted by GHZ28 View Post
    Same price at Supercheap too. So if member/trade you get it for less.

    We had a guy come in to do a cut and shut on an abraded brake hard line
    and when he left he went straight next door to Supercheap and bought one.

    Its a direct copy of the Eastwood one.

    edit. or is it the Toledo one, one of them anyway
    Nice. Pity it doesnt come down any on Club price, probably only Trade. Plus the shipping is more from SCA given its an order in item.
    Chris
    ------
    I cant get no sleep...
    AE86 race car thread is finally up to date | Supposedly i have a new daily project too
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •