Results 1 to 18 of 18

Thread: Wilwood Dynalite Calipers

  1. #1
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    10,653

    Wilwood Dynalite Calipers

    Continuing to clear out the garage to make way for new bits. Was keeping these for the MX5, but gone with NB8C kit instead.



    Used for one race meeting before being swapped for a different bore size to suit the custom pedal box.

    $250
    Chris
    ------
    The new nugget
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  2. #2
    Non Compos Mentos Gammaboy's Avatar
    Join Date
    Jun 2008
    Location
    Brisbane
    Posts
    16,059
    Mount spacing?
    "Where can we get hold of a Vincent Black Shadow?" "Whats that?" "A fantastic bike," I said. "The new model is something like two thousand cubic inches, developing two hundred brake-horsepower at four thousand revolutions per minute on a magnesium frame with two styrofoam seats and a total curb weight of exactly two hundred pounds."

  3. #3
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    10,653
    Quote Originally Posted by Gammaboy View Post
    Mount spacing?
    Gingerbeering diagrams: https://www.wilwood.com/PDF/Flyers/fl104.pdf

    Looks like 5.25" or 133.4mm
    Chris
    ------
    The new nugget
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  4. #4
    Non Compos Mentos Gammaboy's Avatar
    Join Date
    Jun 2008
    Location
    Brisbane
    Posts
    16,059
    Oh, and piston sizes?
    Actually, scratch that, wrong mount spacing for me. And I just read the label on the box.
    Last edited by Gammaboy; 16-05-18 at 11:48 AM.
    "Where can we get hold of a Vincent Black Shadow?" "Whats that?" "A fantastic bike," I said. "The new model is something like two thousand cubic inches, developing two hundred brake-horsepower at four thousand revolutions per minute on a magnesium frame with two styrofoam seats and a total curb weight of exactly two hundred pounds."

  5. #5
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    10,653
    Quote Originally Posted by Gammaboy View Post
    Oh, and piston sizes?
    Actually, scratch that, wrong mount spacing for me. And I just read the label on the box.
    Haha, yeah. That is why i had the box turned up
    Chris
    ------
    The new nugget
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  6. #6
    Non Compos Mentos Gammaboy's Avatar
    Join Date
    Jun 2008
    Location
    Brisbane
    Posts
    16,059
    Yeah, Good buying for whoever grabs them though.
    If they were a 3.5" mount they'd be sold.
    "Where can we get hold of a Vincent Black Shadow?" "Whats that?" "A fantastic bike," I said. "The new model is something like two thousand cubic inches, developing two hundred brake-horsepower at four thousand revolutions per minute on a magnesium frame with two styrofoam seats and a total curb weight of exactly two hundred pounds."

  7. #7
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    10,653
    Yeah. They are a good caliper. But I have diffs that need buying.

  8. #8
    Little engine that could. itsnotagsr's Avatar
    Join Date
    Nov 2001
    Location
    At work :(
    Posts
    18,162
    Hi mate. I'd be keen to grab them but just need to double check its the right one for my application.
    "If you can make black marks on a straight from the time you turn out of a corner until the braking point of the next turn, then you have enough horsepower." - Mark Donahue Penske Porsche 917

    "In Japan we no give fark for Subaru" - Trust Japan Technical Director
    (TM - AVENGE)

    "You can never have enough power. I remember when we had Group B cars... THEN we had enough power!"
    Juha Kankkunen - Rally of Argentina '02

  9. #9
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    1,652
    If they don't fit his application I'll take them and make them fit .....
    " I didn't have $$$$$, so I thought I'd build a car instead" : Ron Tauranac

  10. #10
    Registered User sleepwhendead's Avatar
    Join Date
    May 2016
    Location
    Nowhere
    Posts
    163
    No dust boot on the pistons?

  11. #11
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    10,653
    Slight revision, these are 120-6804 not 6814s. So 35.1 mm bore spacing. I thought i had them in the right box, but evidently not.

    Chris
    ------
    The new nugget
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  12. #12
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    10,653
    Quote Originally Posted by sleepwhendead View Post
    No dust boot on the pistons?
    No. These donít come with dust boots.

  13. #13
    Little engine that could. itsnotagsr's Avatar
    Join Date
    Nov 2001
    Location
    At work :(
    Posts
    18,162
    sorry for the delay - just waiting to find out if these are the same calipers as a kit I was looking at buying.
    "If you can make black marks on a straight from the time you turn out of a corner until the braking point of the next turn, then you have enough horsepower." - Mark Donahue Penske Porsche 917

    "In Japan we no give fark for Subaru" - Trust Japan Technical Director
    (TM - AVENGE)

    "You can never have enough power. I remember when we had Group B cars... THEN we had enough power!"
    Juha Kankkunen - Rally of Argentina '02

  14. #14
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    10,653
    Quote Originally Posted by itsnotagsr View Post
    sorry for the delay - just waiting to find out if these are the same calipers as a kit I was looking at buying.
    NP Let me know.
    Chris
    ------
    The new nugget
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  15. #15
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    10,653
    Quote Originally Posted by itsnotagsr View Post
    sorry for the delay - just waiting to find out if these are the same calipers as a kit I was looking at buying.
    Got your PM, your inbox is full. But
    It should be the right caliper. The Wilwoods come in multiple variations for different thickness and bore configurations. These are for the thickest discs, and have 2 bridge spacers, which from the photo it looks like the Freakyparts kit has. If it is only one spacer then you can easily remove a spacer from the caliper to suit (they are modular in design).
    The Freakyparts kit doesnt specify a bore spacing, but if you are using a boosted master then it should be pretty close.

    The only other thing is the caliper spacing, which the kit looks like its a 5.35" spacing not the smaller 3.5". The lug holes are almost parallel with the width of the caliper.

    I cant say 100% regarding bore, but everything else seems to be correct
    Chris
    ------
    The new nugget
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

  16. #16
    Registered User
    Join Date
    Jun 2016
    Location
    Blue Mountains
    Posts
    72
    If these are still available i will grab them thanks.

  17. #17
    Registered User
    Join Date
    Aug 2013
    Location
    gawler
    Posts
    1,652
    I'm in $265 for them, but I don't NEED them....

    Flick me a Pm with your address again and I'll send them on to you
    " I didn't have $$$$$, so I thought I'd build a car instead" : Ron Tauranac

  18. #18
    Registered User
    Join Date
    Jun 2016
    Location
    Blue Mountains
    Posts
    72
    Cool, thx Roy.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •