Page 4 of 4 FirstFirst 1234
Results 91 to 97 of 97

Thread: Pajeros any good?

  1. #91
    Brian Fantana SkidFace's Avatar
    Join Date
    Jun 2010
    Location
    Adelaide, Marion
    Posts
    2,290
    Put a new set of tyres on this yesterday. No more irritating squeal on slow cornering. Time to stop spending money on this and start thinking about going back to work.
    Quote Originally Posted by Gussy View Post
    It's the PF way. "Put a twin turbo LS in it brah, you'll have it converted and running in 2.5 hours and make an eazy 1000rwkw, lulz" All while the same people who suggest this stuff drive around in a corolla and have a fucked VN sitting in the garage for the past 3 years as a "project car."

  2. #92
    Brian Fantana SkidFace's Avatar
    Join Date
    Jun 2010
    Location
    Adelaide, Marion
    Posts
    2,290
    Ok pf gurus, this thing has developed a bit of backlash from 1-2 and 2-3 gear change. It feels like diff not box, any ideas? Getting a service next week sometime so that will probably diagnose the issue. But does any one know of any common drive line problems?
    Quote Originally Posted by Gussy View Post
    It's the PF way. "Put a twin turbo LS in it brah, you'll have it converted and running in 2.5 hours and make an eazy 1000rwkw, lulz" All while the same people who suggest this stuff drive around in a corolla and have a fucked VN sitting in the garage for the past 3 years as a "project car."

  3. #93
    Registered User
    Join Date
    Jun 2002
    Location
    Townsville
    Posts
    705
    Is it a bit of a clunk on clutch during the upshift? Does it still happen clutching in then out?

  4. #94
    Smrt.. Kyle's Avatar
    Join Date
    Apr 2004
    Location
    nsw
    Posts
    5,916
    They are known to have issues with the driveshaft/hub interface on the left rear hub, causing a bit of a clunk. I know mine has it

  5. #95
    Brian Fantana SkidFace's Avatar
    Join Date
    Jun 2010
    Location
    Adelaide, Marion
    Posts
    2,290
    Got a service today from BigJon. Got a pretty clean bill of health bar a couple of small things, brakes and boots and a diagnosis on the clunk which is a tailshaft issue.
    Cheers Jon for sorting me out.
    Up next is sort out brakes!
    Quote Originally Posted by Gussy View Post
    It's the PF way. "Put a twin turbo LS in it brah, you'll have it converted and running in 2.5 hours and make an eazy 1000rwkw, lulz" All while the same people who suggest this stuff drive around in a corolla and have a fucked VN sitting in the garage for the past 3 years as a "project car."

  6. #96
    serial cyber nudist YBS1OW's Avatar
    Join Date
    May 2002
    Location
    canberra
    Posts
    834
    good to know another cheap option for a 4x4 under 10k. keep up the good work!
    ~~ ~~
    ~ (**) ~
    ~~ /\~~
    ~ mmm...stick boobies~

  7. #97
    Little engine that could. itsnotagsr's Avatar
    Join Date
    Nov 2001
    Location
    At work :(
    Posts
    18,552
    Quote Originally Posted by SkidFace View Post
    Got a service today from BigJon. Got a pretty clean bill of health bar a couple of small things, brakes and boots and a diagnosis on the clunk which is a tailshaft issue.
    Cheers Jon for sorting me out.
    Up next is sort out brakes!
    PM Kabab. He's your source of cheap brake parts. Helped me out recently.
    "If you can make black marks on a straight from the time you turn out of a corner until the braking point of the next turn, then you have enough horsepower." - Mark Donahue Penske Porsche 917

    "In Japan we no give fark for Subaru" - Trust Japan Technical Director
    (TM - AVENGE)

    "You can never have enough power. I remember when we had Group B cars... THEN we had enough power!"
    Juha Kankkunen - Rally of Argentina '02

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •