8860 EMS on L98

Supashake · 31-10-09, 12:49 PM

A Perth IPRA Racer has fitted an 8860 EMS to his L98 Powered Racecar,
Yes I know that makes him a Dickhead but he has done it.
Problem is he cant get the triggering right and Peter has been very helpful but they cant get it running. Im wondering if anyone has done it and can I please have a copy of the MAP?
I have to tune the car for them but want it running first as I dont have time to problem solve and the car is entered for the Phillip island nationals.

10sec_rx7 · 31-10-09, 01:04 PM

crank is a 60-2 from memory
sould be a piece of cake
may have to change the cam gear to a LS2 one to get a single pluse cam reference

Supashake · 31-10-09, 07:13 PM

I dont want to get stuck with the car so thought that if I had a known setup for him to try it would show if it was wiring or setup.

10sec_rx7 · 31-10-09, 08:03 PM

got nothing for ya sorry

Supashake · 31-10-09, 08:26 PM

This is a car I recommended one of your factory ECU kits for Dale. Would be ready to go to the track if he had gone that way.

10sec_rx7 · 31-10-09, 08:37 PM

oh well some people you cant tell... but why the fuck would you put a ems on it??

Supashake · 31-10-09, 09:10 PM

He saw it cheap on Ebay.

10sec_rx7 · 31-10-09, 09:20 PM

ahghahah figures... LOL

FatBoy · 01-11-09, 04:41 PM

Is this Mal's VN Steve ?

Supashake · 01-11-09, 04:57 PM

Yes.
Need to get it running so we can get him to PI.
I guess Ill need to find time to go over to Micks and help.

FatBoy · 01-11-09, 06:23 PM

Have heard a fair bit about it - do you think it'll be quick ?

Supashake · 01-11-09, 09:36 PM

The cars coming to work 2morro, Ill get it running and tune it this week then we can find out. The engine package should go into the 400+rwhp area.
Cars basically a modded Saloon car and Mal drives his heart out.
Ill let you know how it goes.

Supashake · 02-11-09, 05:49 PM

5 unequal teeth on Cam sensor?

bpm · 02-11-09, 09:07 PM

as 10secrx7 said change cam gear to a single pulse 180up 180 down. can get a rollmaster set with a 180 ref and 3 bolt cam.

Supashake · 02-11-09, 10:11 PM

Found a Rollmaster a few hours ago.

FatBoy · 08-11-09, 09:26 PM

Any updates Steve ?

Supashake · 08-11-09, 09:33 PM

Nah, Mals pulled the pin for a few weeks. He is coming to Philip Island as the IPRAWA Bar maid now.

Barney · 08-11-09, 09:49 PM

Quote:

Originally Posted by Supashake

Nah, Mals pulled the pin for a few weeks. He is coming to Philip Island as the IPRAWA Bar maid now.

And IPRAWA Bitch

FatBoy · 08-11-09, 09:56 PM

LOL ! I'm sure he'll do a good job in both capacities...

Full final entry list is up on the IPRA forum too guys...

Supashake · 08-11-09, 09:57 PM

Theres one WA car that is confirmed thats not on the list, Ron white is running in Mals place.
Mals a great Bar Maid.

Supashake · 08-11-09, 10:00 PM

Kevin Simonson is from WA but they didn't put what state he is from.
Kevins the "Big Guy" Of IPRAWA, Trust me he makes Tarzan look like Jane.
Did you see use on Speedweek today?

FatBoy · 09-11-09, 05:25 PM

Nah, i didn't know it was on so i missed it. Do you know if Foxtel are going to replay it ?

Supashake · 09-11-09, 05:53 PM

It will be on Youtube in a day or so. Foxtel is spose to replay it.

Supashake · 10-11-09, 07:58 PM

Quote:

Originally Posted by FatBoy

Nah, i didn't know it was on so i missed it. Do you know if Foxtel are going to replay it ?

http://www.youtube.com/watch?v=3D2Db...layer_embedded

31-10-09, 12:49 PM	#1
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	8860 EMS on L98 A Perth IPRA Racer has fitted an 8860 EMS to his L98 Powered Racecar, Yes I know that makes him a Dickhead but he has done it. Problem is he cant get the triggering right and Peter has been very helpful but they cant get it running. Im wondering if anyone has done it and can I please have a copy of the MAP? I have to tune the car for them but want it running first as I dont have time to problem solve and the car is entered for the Phillip island nationals. __________________ www.iprawa.com

31-10-09, 01:04 PM	#2
10sec_rx7 sack riding Join Date: Nov 2001 Location: Sydney Posts: 8,363	crank is a 60-2 from memory sould be a piece of cake may have to change the cam gear to a LS2 one to get a single pluse cam reference __________________ im a dodgy cunt.... dont believe a word i say....

31-10-09, 07:13 PM	#3
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	I dont want to get stuck with the car so thought that if I had a known setup for him to try it would show if it was wiring or setup. __________________ www.iprawa.com

31-10-09, 08:03 PM	#4
10sec_rx7 sack riding Join Date: Nov 2001 Location: Sydney Posts: 8,363	got nothing for ya sorry __________________ im a dodgy cunt.... dont believe a word i say....

31-10-09, 08:26 PM	#5
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	This is a car I recommended one of your factory ECU kits for Dale. Would be ready to go to the track if he had gone that way. __________________ www.iprawa.com

31-10-09, 08:37 PM	#6
10sec_rx7 sack riding Join Date: Nov 2001 Location: Sydney Posts: 8,363	oh well some people you cant tell... but why the fuck would you put a ems on it?? __________________ im a dodgy cunt.... dont believe a word i say....

31-10-09, 09:10 PM	#7
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	He saw it cheap on Ebay. __________________ www.iprawa.com

31-10-09, 09:20 PM	#8
10sec_rx7 sack riding Join Date: Nov 2001 Location: Sydney Posts: 8,363	ahghahah figures... LOL __________________ im a dodgy cunt.... dont believe a word i say....

01-11-09, 04:41 PM	#9
FatBoy Super Moderator Join Date: Nov 2001 Location: Sydney Posts: 7,697	Is this Mal's VN Steve ?

01-11-09, 04:57 PM	#10
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	Yes. Need to get it running so we can get him to PI. I guess Ill need to find time to go over to Micks and help. __________________ www.iprawa.com

01-11-09, 06:23 PM	#11
FatBoy Super Moderator Join Date: Nov 2001 Location: Sydney Posts: 7,697	Have heard a fair bit about it - do you think it'll be quick ?

01-11-09, 09:36 PM	#12
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	The cars coming to work 2morro, Ill get it running and tune it this week then we can find out. The engine package should go into the 400+rwhp area. Cars basically a modded Saloon car and Mal drives his heart out. Ill let you know how it goes. __________________ www.iprawa.com

02-11-09, 05:49 PM	#13
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	5 unequal teeth on Cam sensor? __________________ www.iprawa.com

02-11-09, 09:07 PM	#14
bpm Registered User Join Date: May 2009 Location: windsor nsw Posts: 213	as 10secrx7 said change cam gear to a single pulse 180up 180 down. can get a rollmaster set with a 180 ref and 3 bolt cam.

02-11-09, 10:11 PM	#15
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	Found a Rollmaster a few hours ago. __________________ www.iprawa.com

08-11-09, 09:26 PM	#16
FatBoy Super Moderator Join Date: Nov 2001 Location: Sydney Posts: 7,697	Any updates Steve ?

08-11-09, 09:33 PM	#17
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	Nah, Mals pulled the pin for a few weeks. He is coming to Philip Island as the IPRAWA Bar maid now. __________________ www.iprawa.com

08-11-09, 09:56 PM	#19
FatBoy Super Moderator Join Date: Nov 2001 Location: Sydney Posts: 7,697	LOL ! I'm sure he'll do a good job in both capacities... Full final entry list is up on the IPRA forum too guys...

08-11-09, 09:57 PM	#20
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	Theres one WA car that is confirmed thats not on the list, Ron white is running in Mals place. Mals a great Bar Maid. __________________ www.iprawa.com

08-11-09, 10:00 PM	#21
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	Kevin Simonson is from WA but they didn't put what state he is from. Kevins the "Big Guy" Of IPRAWA, Trust me he makes Tarzan look like Jane. Did you see use on Speedweek today? __________________ www.iprawa.com Last edited by Supashake; 08-11-09 at 10:01 PM.

09-11-09, 05:25 PM	#22
FatBoy Super Moderator Join Date: Nov 2001 Location: Sydney Posts: 7,697	Nah, i didn't know it was on so i missed it. Do you know if Foxtel are going to replay it ?

09-11-09, 05:53 PM	#23
Supashake Registered User Join Date: Apr 2003 Location: Oz Posts: 1,306	It will be on Youtube in a day or so. Foxtel is spose to replay it. __________________ www.iprawa.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Haltech or AEM EMS?	lay-z	Engine Management	7	13-03-07 09:46 AM
WTB - Haltech E6X or EMS Stinger or 8860	PAZ04U	Cars - General Car Parts For Sale or Wanted	0	26-08-06 07:53 AM
EMS for MR2	Kolly	Engine Management	5	27-06-06 01:46 AM
PhD student looking to develop something new on EMS	kingkong	Engine Management	16	27-09-05 01:22 PM
ems 8860 and the stinger	180 sx	Engine Management	0	29-06-05 01:27 PM